Jeep Grand Cherokee SRT 6.4L 2012+ GForce Performance Outlaw Rear Axles, Left and Right, Upgraded Inner Stubs

MUST USE aftermarket differential bushings or differential brace to help prevent damage to axles from excess rear end movement. Damage that occurs due to the stub not being seated fully will NOT be covered under warranty. 

The 6.4L Jeep uses a 32 spline inner stub and 32 spline outer stub – Customers who are trying to make as much power as possible might consider looking into what is required to swap over to the larger 6.2 Trackhawk wheel hubs.

Outlaw axles also include 1-piece CNC-machined billet steel outer stubs with exotic steel inner stubs. Machined from a single piece of billet steel, GForce outer 1-piece stubs are the strongest stub design period. GForce has now offered to include exotic alloy steel inner stubs that will help give a boost in strength when paired with the factory differential.

In addition to increased strength the Outlaw axles feature anti-wheel hop technology. Originally brought to market by GM several years ago, all GForce axles feature this same technology and offer a significant reduction in wheel hop during hard launches.

Features:
Anti-Wheel Hop Technology
Direct Bolt-In Fit and Finish
Isotropic Surface Finish on CV’s and CV Internals
Upgraded Premium CV Fasteners
Billet Outer Stubs
Exotic Alloy Steel Inner Stubs
Aircraft Grade Certified Alloys
CNC-Machined
Powder Coated Axles For Corrosion Protection
Black e-coat finish on inner and outer stubs to protect against harsh conditions without impeding spline engagement

More about GForce Engineering Half-Shafts
Outlaw axle bars are made from a billet high alloy aerospace material that is similar to 300m but stronger and with properties we have determined make for a strong and reliable axle bar. Material analysis testing found our material to have a higher tensile strength then 300m.

These Outlaw axles also come with custom designed, in-house billet CNC machined severe duty CV stars that provide more spline engagement area and travel then OEM CV stars. This results in a considerably stronger and longer wearing CV star. Custom designed axles and severe duty CV joints to be the strongest axles on the market.

The outer stubs are a 1-piece CNC machined billet stub. 1-piece stubs give you the strongest design possible.

Damage Prevention
NO DRIVELINE COMPONENT IS BOMBPROOF! GForce does not put a power rating on any driveline components as there are entirely too many variables that can affect a driveline component other than just horsepower. We take great pride in building the strongest driveline components to fit certain applications, but it is important to know that YOU, the end customer, are responsible for proper installation and YOU, as the driver, are responsible for the lifespan of your axles or other driveline components.Most of the applications we are working with are heavy vehicles and we are often asking a lot of the driveline components, be it OEM or aftermarket. These heavier cars, paired with high torque levels make all driveline components more susceptible to failure due to small mistakes, such as wheel hop. Many customers understand that wheel hop, tire shake, tire skipping, tire chatter are all bad things but there is often a misunderstanding of how destructive it can really be. The heavier the vehicle and more torque the vehicle is making, the more your window of forgiveness begins to narrow. This can result in CV’s loosening prematurely and more severely, splined stubs and axle bars twisting or shearing, which is NOT a fault of the axle. So please use your best judgement when driving in any given scenario, be it on the track or the street.

It is worth noting that most wheel hop related issues rarely cause an immediate failure, with certain exceptions. The result of repeated cycling torque spikes will often weaken the material of a given component such as an axle bar or stub shaft. Then each subsequent hit will continue to weaken the component until it fails completely. If you know that you have driven through a particularly abusing situation, it would be wise to pull the axles and assess the splines of the inner and outer stub shafts as a maintenance procedure. If they have started to twist or shift, then you might be able to prevent a more catastrophic failure. We encourage all end users to read up on the appropriate measures that they can take to help prevent wheel hop with their specific vehicle. This can be anything such as aftermarket bushings, shocks, springs, control arms, tire type, or excessively low tire pressure. Two of the most fundamental pieces we look at to help control rear end movement and prevent wheel hop start with the cradle and differential bushings. Both of these bushing sets are often very soft from the factory and although they provide smooth ride quality, they allow a considerable amount of movement in a performance scenario. Which can lead to a number of concerns or issues.

If you have any further questions please email us at [email protected]

Lowered Vehicle Information
GForce axle shafts were manufactured based on OEM suspension. Aftermarket shocks, control arms, etc. may present clearance issues. If CV boots have clearance issues, low profile boots can be purchased at an upgraded cost. The low profile boots reduce the amount of available axle angle in comparison to the standard boots, so they are not ideal for lowered or high axle angle vehicles. If you have questions or would like to add low profile boots to your axles, please contact us for more information.

Maintenance Information 
All driveline components will fatigue or wear over time depending on how the vehicle is driven and what level of performance is demanded from them. CV joints are a wear item and will see wear over time, but with our current design, axles can be sent in for service. So boots, fasteners, and CV assemblies can be serviced without scrapping the complete axle assembly. It is up to each customer to establish their own maintenance intervals based upon the manner in which their car is driven. Individual inner or outer splined stubs and axle bars can be replaced as well if they twist or are damaged due to wheel hop or simply from power levels exceeding capability of the material.

TREperformance is an Authorized Priority Dealer of GForce Performance Engineering.