Additional Images

Harland Sharp Small Block Mopar 7/8" Shaft Mount Roller Rocker Arms, 1.6 Ratio, for TFS Powerport Heads

SKU: CSP-S72026K

Harland Sharp Small Block Mopar 7/8" Shaft Mount Roller Rocker Arms, 1.6 Ratio, for TFS Powerport Heads

Notes: Designed for Trick Flow cylinder heads. Kit includes rocker shaft hold-downs. Harland Sharp Mopar kits are for extreme applications with valve springs up to 1.500 diameter and .900 lift cams. The 7/16-20 x 5/16 ball adjusters are designed for use with the factory style pushrods, length to be determined after you have rockers installed.

Pricing: $962.99

Description
Details
Shipping

Description

Specs:
Rocker Arm Mounting Style: Shaft
Self-Aligning: No
Rocker Arm Ratio: 1.6
Maximum Spring Diameter (in.): 1.560 in.
Rocker Arm Style: Full roller
Shaft Diameter (in.): 0.875 in.
Shims Included: No
Rocker Arm Material: Aluminum
Rocker Arm Body Style: Standard
Rocker Arm Fasteners Included: No
Rocker Arm Finish: Orange anodized
Quantity: Sold as a kit.

Fits:
For use on a Small block Mopar "LA" head with a magnum block- ***Pushrod Oiling***

Kits includes:
Rocker arms, shafts, spacers, hold down clamps, adjusters and nuts, rocker shaft hold-downs.

Special Notes:
Harland Sharp SB Mopar kits require taller valves. Approximately .100-.150 are necessary for correct geometry but sometime lash caps can be used. Needle bearing allow for more oil flow to the rockers. Oil restrictors may be necessary to maintain oil pressure. Rockers are designed for big lift cams requiring .100 to .150 taller valves. Rocker shafts are drilled to allow for 3/8 mounting hardware. Rocker spring clearance is limited to 1.500 if more spring clearance is required, Designed Specifically for the Trickflow SB Mopar Head that uses pushrod oiling