Genuine Bosch 0280158117 EV14 EV6 52lb 550cc Mid Length Fuel Injectors - 8

Included: (8) Genuine Bosch 0280158117 fuel injectors.

These High Resistance(Approx. 12 OHMS) Saturated Bosch injectors which work on most top feed Bosch fuel injected vehicles.
Email us if you have questions regarding fitment.

These injectors flow 52 lbs/hr at 43.5 PSI (3 BAR) or 550 CC/min @ 43.5 PSI and more at higher PSI.
In addition, these units are high-impedance. Despite the high flow rate these units are high-impedance, plus they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive-ability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. These injectors represent the most current Bosch engineering and are used on many high power oem applications including the GT500.

These injectors are able to function at high fuel pressures and don't exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. Many tuners push these injectors to 6 bar and higher. Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors pencil stream high flow injectors; these injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow.

These Bosch fuel injectors will fit many applications, including, but not limited to:

2007-2016 BMW M3
2004-2016 Nissan Titan
2005-2014 Chrysler 300c SRT-8
2008-2016 Dodge Challenger SRT-8
2006-2016 Dodge Charger SRT-8
2005-2008 Dodge Magnum SRT-8
2006-2016 Jeep Grand Cherokee SRT-8
2007-2014 Ford Mustang GT500 Shelby
2010-2016 Chevrolet Camaro SS
2005-2013 Chevrolet Corvette Z06 LS2
Holden Commodore VZ / W427 / E-HSV
Holden Monaro LS2

Specifications
Flow Rate in CC per minute: 550 CC/min @ 43.5 PSI
Flow Rate in LB per hour: 52 LBS/HR @ 43.5 PSI
Resistance: 12 ohms (High Impedance, High Resistance)
Voltage: 10-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30 PSIG/ Max 100 PSIG
O-Rings Included: Yes, on the injectors
Fuel Delivery: split cone spray pattern
Electrical connector type: EV6/EV14 (Minitimer, Jetronic)
Overall Length: 64.1mm, 48.5mm o-ring seat to seat
Orings: Top and bottom, 14mm
Filter basket on top with a six-hole disc fuel delivery nozzle for superior fuel atomization