Additional Images

TorqStorm 1996-2004 Mustang GT 4.6L 2V Supercharger Kit

ARP-K-FD-4.6-2V
This kit was designed and fits the 1996-2004 Mustang GT, the kit has also been used and installed in panther body cars, Crown Vic, Lincoln town car, Grand Marquis. May fit other applications. Please reach out to tech@torqstorm.com for dimensions and fitment help. Some components in these chassis may need to be moved and relocated. That is the responsibility of the installer.

Add over 125whp to your stock 4.6 2V by bolting on a TorqStorm Supercharger kit.

7-10lbs+ of boost and horsepower ratings averaging 500 WHP+ with basic bolt on parts.
Pricing: $4,100.00

Customize Your Item

- Finish Options -
Qty:
Free Basic Shipping

Description

Included in the kit:

75MM billet supercharger.
3/4″ thick bracket assembly with idlers and spacers
8-rib Supercharger belt
ATI crank damper
8 rib supercharger crank pulley
52mm blow-off valve with weld-on blow-off nipple and mounting hardware
Intake air filter and clamp
Everything to affix the supercharger to the engine
Detailed instructions

Options for the fuel system, supercharger inlet plumbing, intercooling, charge-air plumbing and tuning are readily available. Hence, we leave these variables to the discretion of the installation shop or end-user.

Of note: When considering the array of supercharger kits on today’s market and comparing their varying merits, it is prudent to study carefully the quality of all their components even in high-priced kits. Ensure you are investing in premium parts.

TorqStorm® has a few optional pieces along with information to help you complete your kit. Don’t hesitate to contact us for more info.

Not for use with a motor vehicle pollution control device or system. Off road use only
This product is NOT legal for sale, installation, or use on a licensed vehicle in the state of California, as it does NOT meet CARB compliance. Legal only for racing vehicles which may never be used upon a highway. Not applicable or intended for street or highway use.

* Intercooling is suggested on all non-carbureted applications, but is not included. However, a bung is included for water meth injection.
* Tune is not included
* Larger fuel pump and injectors are required, however not included

- Shipping in the 48 Contiguous States (Alaska, Hawaii & international, please contact us for a shipping quote)

- Average lead times are typically 4 weeks for standard finish. Up to an additional 2 weeks for black anodized kits.


This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

1965 and older U.S. manufactured California Certified vehicles
1967 and older U.S. manufactured Federally Certified vehicles
1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:

Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

1966 and newer U.S. manufactured California Certified vehicles
1968 and newer U.S. manufactured Federally Certified vehicles
1968 and newer Foreign manufactured vehicle

*** BE SURE THIS KIT FITS YOUR APPLICATION! IF YOU HAVE ANY QUESTIONS FEEL FREE TO CONTACT US. ***

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 55.0 lbs.
  • W20.0000” x H20.0000” x L23.0000”
  • Free Basic Shipping

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST