BTR Gen III 6.4L HEMI VVT 228 Camshaft

580+ HP at the crank of your 6.4L Hemi is what you can expect with our 228 camshaft. The 228 grind provides additional horsepower and torque throughout the entire operating range while delivering an aggressive idle quality . On the BTR Superflow engine Dyno, we observed gains starting at 2400 RPM, with a peak gain of 50+ HP at 6500 rpm and 46 lb/ft at 6400 RPM. The 228 continues to pull strong up to 7000 RPM!

224 Camshaft requires the use of a VVT Limiter to be installed in your cam phaser. This is included in the camshaft box no need to purchase. However, if you do not already have the required installation tool, you will need to purchase the tool separately see the product options.

Camshaft Specs
Cam Style: Hydraulic roller, OE roller
Camshaft Duration: 228 int./24X exh.
Valve Lift: 0.611 int./0.609 exh.
Valve Lobe Lift: 0.370 int./0.369 exh.
Lobe Separation (degrees): 111
RPM Operating Range: 2000-7000
Expected Cam Swap Gains: 50+ Horsepower, 46 Ft/lbs, extra 500 RPM of operating range
Non-MDS Camshaft - Requires MDS Conversion Kit see the product options or for a full complete engine refresh kit including MDS delete parts see PN: BTR-MDS-HEMI

*This camshaft requires an aftermarket converter.

Camshaft Qualities
Camshaft Idle Quality: Super Aggressive
Camshaft Chop: 9/10

Additional Notes:
Lifters Required: Mopar Performance Hellcat Lifters (PN: 05038784AD) or Johnson Lifters (PN: 2326R), Lifters are included with MDS delete kit which can be added using the product options.
MDS Conversion Required, see the product options or for a full complete engine refresh kit including MDS delete parts see PN: BTR-MDS-HEMI
Recommended Valve Springs: BTR-SK024 (Can be added in the product options)