Remote Tuning - Standard Service

Remote Tuning Requirements

- HP Tuners MPVI3 With Credits already purchased for your vehicle, See here to purchase your MPVI3 and Credits!
- A PC or Laptop compatible with VCM Suite BETA which must be updated to the newest firmware
- A Wideband O2 sensor to see the Air/Fuel Ratio
- Filling out our Remote Tuning Questionnaire, See Here For Questionnaire 

How Does Our Remote Tuning Work?

First Step:
Confirming that your VCM Suite app is updated to the newest & Latest firmware
Confirming/Calibrating all sensors to confirm they are functioning correctly
Troubleshooting first start problems - confirming rpm, spark, fuel 
Guiding you through confirming the base timing 
Creating & Confirming your baseline tune is uploaded

Second Step:
Remote Street Tune: Read emails & drive car as instructed then send logs through email to build and create final tune (All Data Logs must be sent in this format make sure data log is sent in this format to avoid any delays LastnameFirstname_Day/Month/Year_Datalog#.HPT | Example : DoeJohn_xx/xx/xxxx_1.HPT).

Third Step:
Fine tune and polish up any final edits for your tune, And do any revisions to your preference of driving our tuning service includes 4 revisions, after all revisions have been used you can purchase a revision for $50 (Revisions do not include re-tuning injector changes, cam changes, fuel changes, etc. there will be an additional charge for any re-tuning.)

Additional Required Hardware:

If you own a 2015 or newer Mopar you will need an unlocked PCM, See here to purchase or upgrade your current PCM
If you own a 2018 or newer Mopar you will also need a Smart Access Cable, Can be purchased with your required PCM upgrade in the link above
See here for PCM/ECM/TCM unlocked vehicles, including Global B Vehicles