Aerospace 2014-2019 C7 Corvette 4 Piston Pro-Lite Rear Drag Disc Brakes
Notes: For Drag Race Use Only (Not For Street Use), For Cars Under 3200lbs, or Heavier Cars using a Parachute
*Notice for those using OEM spacing select 4.73" spacing for any aftermarket knuckle make sure to measure and select the correct spacing for your application!
Description
This kit will drastically reduce the weight of your brakes and are worth at least 1/10 in the quarter, but are strictly for drag racing use because the rotors are not vented and will warp under street driving use. If you need brakes for street use, take a look at our Aerospace street brakes for your vehicle. These are the brakes which Aerospace recommends For Cars Under 3200lbs, or Heavier Cars using a Parachute
This kit does NOT include vented rotors standard, so you cannot use these brakes for street driving because it will warp the rotors.
Brake Kit Includes:
Billet Aluminum Direct Bolt on Proprietary Calipers (Bracketless Design!)
Billet Aluminum Hats
Hawk Performance Brake Pads
11 3/4 Diameter, Lightened and Profiled 5/16 Thick Drilled Rotors
Grade 8 Hardware
Retains Stock Sealed Bearing Hub Assembly and ABS sensors
Meets All NHRA/ IHRA Requirements
Fits:
2014-2019 Chevy Corvette
Notes:
This kit does not have a parking brake
This kit has also been very successful in Formula Drift - Driver: Joao Barion
Details
Shipping Information
- Item Requires Shipping
- 25.0 lbs.
- W15.0000” x H15.0000” x L15.0000”
- Free Basic Shipping
- FREE continental USA ground shipping on ALL Aerospace Components
May We Suggest
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST