Ford Mustang 1979-1995 / Mercury Capri 1979-1986 Kooks Long Tube Headers Coyote Swapped W/ Manual Transmission For Foxbody/SN95 1-7/8" x 3"

Legend has it that there's a mystical chili that grows deep in the belly of the Amazon, and that anyone who dares take a bite goes completely insane. We can't say if the story is true, but we do know for sure that you'll go nuts for the gut-wrenching power of Kooks Street Headers. Whether you're hopping up your Sunday driver or souping up your track star, Kooks Headers unleash an insane amount of performance. In fact, no other header company can top Kooks when it comes to cranking out the ponies. Of course with more than fifty years of experience under the hood, it's no wonder why they're still leading the pack.

Description:
1-7/8" x 3" Stainless Steel Long Tube Headers 1979-1995 Ford Mustang with 5.0L 4V Coyote Modular Engine
For use with Manual transmissions w/ OEM style bellhousing
Includes Gaskets and Headers bolts needed for installation
Designed for use with Maximum Motorsports K-Member PN:MMKM-2.1 and STANDARD 4.6L motor mounts - Maximum Motorsports PN:6-504-BL
Must use 1997-2000 Mustang 4.6L Starter - Ford P# SA848RM or Equivilent
Requires Removal of OEM Tranmission Crossmembers Mounts
Recommended for use with STIFFLERS transmission crossmember
Cannot be used with 2015 & Newer Coyote engines with Charge Motion Control Valves
Cannot be used with OEM style rubber rag joint STEERING SHAFT
Replaces PN's: 10502400, 10502401
For Automatic Transmission Use Part# 10502402
These products are NOT legal for sale, installation, or use on a licensed vehicle in the state of California, and they do NOT meet CARB compliance

SPECS:
Fitment: 1979-1995 Ford Mustang / 1979-1986 Mercury Capri
Engine Type: Coyote Swap (5.0L 4V Coyote Modular Engine Swap)

Sales and Quality
Kook’s Headers has been in business since 1962. With over 50 years of header and exhaust knowledge, you can guarantee that you’re getting the best made products possible.
Kook’s Headers and Exhaust make the most horsepower and torque in the industry. Gains have been over 60 horsepower and 50 foot pounds of torque to the rear tires.
Kook’s products are 100 percent manufactured in a 45,000 square foot state of the art facility, located in Statesville, North Carolina.
Kook’s products are made out of T304 air craft quality Stainless Steel. The competition uses a lesser grade of stainless; either 200 or 400 grade.
Each Kook’s system is designed specifically for the engine and vehicle it is built for. Kook’s utilizes the firing order of the engine when designing their tubes.
There is never any welding required when installing a Kooks system. All gaskets, bolts and oxygen sensor extensions are included with your kit.
Kook’s utilizes laser cut 3/8” thick stainless steel flanges so they won’t warp or bend. They also hand grind each port to ensure they are perfectly smooth so there is no exhaust constriction.
Every header collector has a Kooks scavenging spike in it to ensure maximum flow.
Kook’s headers carry a limited lifetime warranty to the original purchaser of the product.
Every Kook’s header and exhaust system is designed using the most technically advanced equipment and is blended with over 50 years of racing experience. Every system is dyno and race tested to ensure the results are of Kooks expectations or better.
Kook’s has designed and produced a 400 cell count metallic high flow catalytic convertor that is used standard in every system. The competition uses a 200 cell count catalyst which is supposed to be used for industrial applications, not automobiles.
Kook’s is the only company in the industry that has a 49 state EPA approved catalytic convertor that can be used in any of their systems. This catalyst flows as much as the standard high flow ones and significantly reduces the likelihood of a “Check Engine Light” being turned on.
Kook’s Headers is involved with all types of automobile racing. They are an official contingency partner with NASCAR and makes parts for the ARCA, Lucas Oil Series, IMCA, URA, and many other oval style racing series.
Kook’s also supplies cars in the SCCA and NASA. Drag racing was the back bone of Kooks and we support the NHRA, PDRA, NMCA, NMRA, Fun Ford Weekend, PTRA and many more.