Additional Images

Dodge RAM Truck 1500 5.7L 2019-2020 Kooks Torque Series Shorty Headers 1-5/8” x 1-3/4”

35201110
Kooks Headers and Exhaust are announcing an addition to The Kooks Torque Series. Providing a solution for customers who are looking for a factory manifold replacement with a performance gain for their street driven truck. These headers are designed to be used with factory catalytic converters and include provisions for the Factory EGR system.

The newest release in the Kooks Torque Series headers for 2009-2018 RAM 1500 Trucks with the 5.7L HEMI. These headers are made in high-quality 304-grade stainless steel with 3/8” thick flanges, heavy-duty 16 Ga. primary tubes that step from 1-5/8” to 1-3/4”, our patented scavenging spikes and one-piece collectors. The outlet of the headers features 3/8” thick 2-bolt flanges and formed balls to connect to the OEM exhaust allowing for a direct bolt-on installation. The kit will include installation hardware, and required gaskets.

When bolted onto the 5.7L HEMI, the Torque Series headers flatten the torque curve to produce an increase of 25+ H.P. at 5500 RPM and 40+ lb-ft of Torque at 4100 RPM over the stock manifolds when measured at the tire. The peak numbers show an increase close to 25+ H.P. and 15+ lb-ft of Torque.

While Kooks Performance Headers may not be street legal in California, Kooks Products are Backed by a Limited Lifetime Warranty To the Original Purchaser. Kooks Products Are Dyno And Race Tested and Designed For Maximum Power.
Shipping: FREE SHIPPING ON ALL KOOKS HEADERS
Was: $3,063.22
Sale: $2,756.90
Save: 10%
Save: $306.32

Qty:
Free Basic Shipping

Description

Description:
3/8" Thick 304 Stainless Steel Flange with D-Shaped Port
Stepped Construction for Maximum Performance
Heavy Duty 16GA 304 Stainless Steel Tubing for Improved Durability
Includes Provisions for EGR
Connects Directly to Factory Catalytic Converters
No Additional Parts Required

SPECS:
Fitment: 2019-2020 RAM 1500 Trucks

Sales and Quality
Kook’s Headers has been in business since 1962. With over 50 years of header and exhaust knowledge, you can guarantee that you’re getting the best made products possible.
Kook’s Headers and Exhaust make the most horsepower and torque in the industry. Gains have been over 60 horsepower and 50 foot pounds of torque to the rear tires.
Kook’s products are 100 percent manufactured in a 45,000 square foot state of the art facility, located in Statesville, North Carolina.
Kook’s products are made out of T304 air craft quality Stainless Steel. The competition uses a lesser grade of stainless; either 200 or 400 grade.
Each Kook’s system is designed specifically for the engine and vehicle it is built for. Kook’s utilizes the firing order of the engine when designing their tubes.
There is never any welding required when installing a Kooks system. All gaskets, bolts and oxygen sensor extensions are included with your kit.
Kook’s utilizes laser cut 3/8” thick stainless steel flanges so they won’t warp or bend. They also hand grind each port to ensure they are perfectly smooth so there is no exhaust constriction.
Every header collector has a Kooks scavenging spike in it to ensure maximum flow.
Kook’s headers carry a limited lifetime warranty to the original purchaser of the product.
Every Kook’s header and exhaust system is designed using the most technically advanced equipment and is blended with over 50 years of racing experience. Every system is dyno and race tested to ensure the results are of Kooks expectations or better.
Kook’s has designed and produced a 400 cell count metallic high flow catalytic convertor that is used standard in every system. The competition uses a 200 cell count catalyst which is supposed to be used for industrial applications, not automobiles.
Kook’s is the only company in the industry that has a 49 state EPA approved catalytic convertor that can be used in any of their systems. This catalyst flows as much as the standard high flow ones and significantly reduces the likelihood of a “Check Engine Light” being turned on.
Kook’s Headers is involved with all types of automobile racing. They are an official contingency partner with NASCAR and makes parts for the ARCA, Lucas Oil Series, IMCA, URA, and many other oval style racing series.
Kook’s also supplies cars in the SCCA and NASA. Drag racing was the back bone of Kooks and we support the NHRA, PDRA, NMCA, NMRA, Fun Ford Weekend, PTRA and many more.

Details

Shipping Information

  • Item Requires Shipping
  • 30.0 lbs.
  • W12.0000” x H18.0000” x L18.0000”
  • Free Basic Shipping
  • FREE SHIPPING ON ALL KOOKS HEADERS

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST