VMP Performance 2007-2014 Shelby GT500 GEN3R 2.65L TVS Headunit

There are many options available for VMP Performance Supercharger kits. If you have any questions please email [email protected] or call 760-586-5617.

All new casting
Patented Magnuson Stage 2 DFT port geometry
Smoother airflow path into rotors
Uses stock GT500 throttle-body bolt pattern for an improved short turn radius

2007-2012 5.4 L Shelby GT500s should expect 680-800 rear wheel horsepower (750-900 crank HP) with 2.8”-2.5” upper pulley sizes on the stock engine. Overdrive lower pulley NOT required.

2013-2014 5.8 L Shelby GT500s with the factory 2.3 L TVS will see huge improvements with the VMP 2.65 L Gen3R TVS due to the higher twist and resultant efficiency increase with the new 2.65 L rotorpack. You can expect 750-800+ rear wheel horsepower with a 2.6”-2.5” upper pulley on the stock engine.

800 rwhp is the recommended safe limit on the stock engine and the VMP Gen3R can easily achieve that with supporting modifications and good fuel (E85 or 93+boostane).

Built engines with forged pistons/rods, aftermarket camshafts, and cylinder head porting can see 1000+ rwhp depending on compression ratio and fuel used. 10% or 15% ATI overdrive pulley recommended and available from VMP.

TREperformance is an Authorized Installing Dealer of VMP Performance Superchargers.
Custom made and shipped direct from VMP Performance in 5-10 business days!'

VMP Performance Dealer information
VMP Performance is very strict about who they allow as dealers. VMP Performance dealers must have experience with high performance forced induction applications and provide excellent customer service and application advice. Most online only or mail order companies are unable to qualify as dealers, but you are welcome to stop by our shop to talk about your application or view our supercharger kits.