Ford Mustang Shelby GT350 2016+ Twin 58mm Hellion Turbos Intercooled Race Kit

There are many options available for Hellion Turbo kits. If you have any questions please email [email protected] or call 760-586-5617.

These turbocharger kits are the most complete available, including everything needed for installation other than fuel system and tuning. This includes headers, bypass valves, intercooler, all the tubing, piping, fittings, and clamps. You do not need to make any major modifications or purchase special tools. Many customers install in their garage or driveway over a weekend.

DETAILS:
Horsepower gain: 1600+ HP with further supporting mods
Twin Precision 58mm Hellion turbos (v-band inlet for easy installation)
Large vertical flow dual inlet intercooler
Twin Turbosmart VEE port bypass valves
No cutting of body for easy installation
Fuel Pump Supplied: Not Supplied
Fuel Injectors Supplied: Not Supplied
Computer/Ignition Mods.: Not supplied
Easiest and quickest installation
System is 100% complete with OEM quality and appearance

*Designed to connect to the factory H-pipe

DISCLAIMER: Hellion's products are sold for competition vehicles only and are not legal to be sold or installed in the state of California. All performance modifications and installations are at the customer's own risk and Hellion holds no responsibility for any consequences, legal, or other, of such use and/or misuse.

TREperformance is an Authorized Priority Dealer of Hellion Turbo.
Lifetime warranty on all stainless steel piping, direct from Hellion
Custom made and shipped from Hellion Turbo in 7-10 business days!

Hellion Turbo vs Supercharger
When compared to a supercharger unit, the twin-turbo system has a broader power band than comparable superchargers. For example, a supercharger makes peak horsepower at peak RPM, let’s say 6,500 RPM. A turbo will make peak power at a lower RPM, say 4,000 RPM. The turbo will then carry the power to redline. The supercharger will have a lower bhp at 4,000 RPM. The turbo will have no parasitic loss as the turbo is driven with spent exhaust gases while the supercharger is belt-driven. 

More Power Potential 
This system was designed to operate from 5lbs to over 30lbs if desired. Most customers only run 5lbs of boost, which in the case of The Hellraiser, will make an average of 550rwhp (over 600 horsepower at the crank). Turning the boost up with a turbo is as easy as changing the wastegate spring or adding a manual or electronic boost controller. 

Easier On Your Engine 
Since the Hellraiser kit is fully modular in terms of boost, a turbo kit can be a safe and reliable choice for fully built engines or stock engines. 

Factory Fitment 
Everything is supplied in the system from full tubular headers, turbos, downpipes, wastegates, and all the bells and whistles needed to install the turbo kit into your vehicle. Quality fitment ensures that the turbocharger kit gives a stock-fitment look under the hood that bolts into the factory exhaust location.

Retention of All Accessories 
This will allow the retention of all factory accessories since the turbo is driven with spent exhaust gasses rather than a belt-driven supercharger.

Full Tubular Headers (No Restrictive Log Manifolds) 
It is known that exhaust manifolds create backpressure that limits horsepower and efficiency - two critical elements of a vehicle's performance. These kits, however, include full long tube headers which eliminate this problem; thus, allowing the gases to exit without the creation of backpressure. 

Unsurpassed Technical Support 
Having been touted as the company that revolutionized the Mustang turbocharging industry, Hellion is continually contacted by its competitors' customers seeking tech support. In many cases, the customer was unable to contact and/or receive support from their competitor. It is their pleasure to support the turbocharging industry regardless of brand or place of purchase. 

Lifetime Warranty On All Stainless Parts 
Not to mention, they also include a lifetime warranty on all stainless steel parts to provide the best customer satisfaction.

Hellion Dealer information
Hellion is very strict about who they allow as dealers. Hellion dealers must have experience with high-performance forced induction applications and provide excellent customer service and application advice. Most online-only or mail order companies are unable to qualify as dealers, but you are welcome to stop by our shop to talk about your application or view our supercharger/turbo kits.