TRE 120lb Bosch/Siemens Deka IV Style Fuel Injectors - 4

Included: 4 Thin Body Bosch style injectors. The photo is an example of a similar set.

See this video of us testing some TRE injectors on our ASNU flow bench:
TRE Fuel Injector ASNU Flow Testing

These 120 lb High Resistance(Approx. 12 OHMS) Saturated fuel injectors are flow matched and will fit all of the following vehicles:
Any Audi A4 S4 TT with the 1.8L or 1.8T engine
Any Ford 2.3 or 2.3T Engine, 1984-1993
Any Ford Focus Engine (Spacers may be required)
Any VW Golf, Passat, Jetta IV 1.8T

Any Engine with Bosch EV1 style injectors

These are Bosch style injectors which work on most top feed Bosch fuel injected vehicles.
Email us if you have questions regarding fitment.

Note:
If your vehicle needs OBD1 style injector clips/plugs, please select them from the drop down menu above - additional $19.95.

Specifications
Flow Rate in CC per minute: 1250 CC/min @ 58 PSI
Flow Rate in LB per hour: 120 LBS/HR @ 58 PSI
Flow Rate in CC per minute: 1100 CC/min @ 43.5 PSI
Flow Rate in LB per hour: 105 LBS/HR @ 43.5 PSI
Actual flow rate of your injectors may vary, but will be matched together
Resistance: 12.5 ohms (High Impedance, High Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 10.0 Amps
Pressure: Min 30 PSIG / Max 100 PSIG
Spacers/O-rings Included: YES, on the injectors
Fuel Delivery: Upgraded single fuel delivery nozzle for superior fuel atomization
Spray Pattern: 30 Degree Spray Cone
Electrical connector type: EV1 Square Plug
Body Design: Compact, composite plastic
E85 Compatible: Yes
Offset: 0.065ms
Turn on time @ 14VDC: 1.3ms
Turn off time: 0.7ms @ 600KPa
Series: DEKA 4 ( DEKA IV )
Overall Length: 2 7/8 inches, 74 mm
O-ring to O-ring Length: 2 1/2 inches, 63 mm
Diameter: 16 mm
Orings: Top and bottom 14.5 mm
Warranty: 1 Year Warranty!

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

TREperformance Fuel Injector Guarantee:

TREperformance warranties all of our fuel injectors for 1 year from the purchase date. If you have any problems with your injectors we will test them and replace any defective injectors free of charge. Buy with confidence though, in years of selling these injectors we have seen virtually no injectors fail! If you feel any of your injectors may be defective just contact us via email to receive an RMA number and we will reply back with all the return instructions. No returns are accepted without an RMA number. All of our TRE Fuel Injectors are manufactured according to strict guidelines in order to maintain ISO 9002 and ISO/TS 16949 quality system certifications.

TREperformance manufactures these fuel injectors and has each injector tested before shipment. These brand new, recently developed fuel injectors are always in stock and will often ship the day of payment. Save some money and try our TRE Fuel Injectors. We back them with a 1 year warranty! Thank you for considering TREperformance Fuel Injectors!