AFR Chevy 195cc Enforcer As-Cast SBC Cylinder Head, 64cc Chambers, Straight Plug, Assembled
The head is made from a permanent mold casting that comes with As-Cast surfaces on the intake runners, exhaust runners, and combustion chambers. This head is a perfect choice for anyone looking to upgrade to an aluminum head with modern port designs for their muscle car or street rod.
Sold as a single piece, 2 pieces required per engine. Steam holes pre-drilled on these heads. Will work on any SBC block including 350 and 400.
Description
AFR's 195cc SBC Enforcer Cylinder head feature a Permanent Mold “As-Cast” Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. This budget friendly head is perfect for your 350 to 400 Cubic Inch operating below 6000 RPM.
The all new SBC 195cc Enforcer cylinder head feature 2.020" intake valves, 1.600" exhaust valves, and come assembled with their 8017 springs; which are compatible with hydraulic roller or "Street" solid flat tappet camshafts. Sold as a single piece, 2 pieces required per engine. They also come fully assembled with the identical components found in their higher end CNC ported cylinder head; such as ARP rockers studs, PAC Racing springs, viton valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring cups and ductile iron seats (not powdered metal) their one piece 8mm 21 4N Stainless Steel valves. They are available in straight or angle plug and bare without any parts for the DIY. Sold as a single piece, 2 are required per engine
195cc As Cast Flow Chart | ||||||
.200 | .300 | .400 | .500 | .550 | .600 | |
Int | 133 | 188 | 226 | 250 | 251 | 251 |
Exh | 104 | 138 | 158 | 186 | 191 | 197 |
Test conducted at 28" of water (pressure) on Superflow 600
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe
Basic Package Components | Part # |
As-Cast Combustion Chambers As-Cast Exhaust Ports As-Cast Intake Ports 3-angle Valve Job |
|
8mm Bead Lock Intake Valve, 2.020" x 5.000" Overall Valve Length | AFR #7257 |
8mm Bead Lock Exhaust Valve, 1.600" x 5.030" Overall Valve Length | AFR #7254 |
PAC Racing Spring 1.290" OD Hydraulic Roller Dual Valve Spring, 140 lbs on seat, .600" maximum lift, Max RPM 6300-6500(upgrades available) |
AFR #8017 |
7° Chrome Moly Retainers 1.245" O.D x .885" I.D x .655" I.D | AFR #8514 |
7° Bead Lock Valve Keepers | AFR #9007 |
ARP 3/8" Rocker Studs | AFR #6409 |
Adjustable 5/16" Guide Plates | AFR #6103 |
Viton Valve Seals .675" O.D x .513" I.D | AFR #6614 |
Hardened Valve Spring O.D Locator 1.380" O.D x .570" I.D | AFR #8042 |
Specifications, Features, and Optional Supporting Components |
Head Material |
A356 Aluminum |
Intake Port Volume | 195cc |
Intake Port Dimension |
2.080" H x 1.270" x 5/16 Radius |
Intake Port Location
|
Stock |
Exhaust Port Volume | 76cc |
Exhaust Port Dimension |
1.380" H x 1.420" W |
Exhaust Port Location |
Stock |
Combustion Chamber Size |
64cc |
Valve Cover Bolt Pattern
|
Perimeter Bolt |
Valve Angle |
23° |
Valve Spring Pocket Diameter |
1.580" O.D |
Max Valve Spring Pocket Machining |
1.600" O.D |
Warning: Do not machine spring pad any deeper. |
|
Deck Thickness
|
.450" |
Spark Plug Dimensions |
14mm x .750" w/Gasket Seat |
Head Bolt Diameter
|
1/2" |
Intake Port Gasket |
AFR #6900 |
Exhaust Port Gasket |
AFR #6905 |
Head Gasket, 350cid Fel-Pro #1003 |
AFR #6800 |
Head Gasket, 400cid Fel-Pro #1014 |
AFR #6802 |
SB Chevy Head Bolt Kit, ARP #134-3701 |
AFR #6310 |
SB Chevy Head Stud Kit, 12 Point Nuts, ARP #234-4301 |
AFR #6305 |
Head Bolt Washers, Manley |
AFR #6320 |
Suggested Manifold |
AFR #4810 |
Suggested Manifold |
AFR #4812 |
Suggested Manifold |
RPM Performer or Vic Jr.
|
Flat Mill |
.006" per cc 56cc Maximum |
Spark Plug Starting Range |
Autolite 3924 |
Note: Milling head deck will affect flow numbers.
These heads are perimeter bolt only, no option for center bolt. The heads have the 86' and older bolt pattern and the Vortec bolt pattern, but only the 86' and older intakes will work due to the port dimensions. The Vortec is a taller port and won't match.
Details
- AFR 1001
- AFR 1001
- Air Flow Research
- New
Shipping Information
- Item Requires Shipping
- 65.0 lbs.
- W12.0000” x H12.0000” x L24.0000”
- Free Basic Shipping
- This item ships in its own box.
- FREE continental USA ground shipping on ALL AFR Cylinder Heads
May We Suggest
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST