Additional Images

Injector Dynamics ID1700 Fuel Injectors 2007+ Nissan Skyline GTR, R35, VR38DETT

ID1700.48.14.R35.6
This is a set of 6 Injector Dynamics ID1700 fuel injectors. Top feed for 2007+ Nissan Skyline GTR, R35, VR38DETT.

Nominal Flow Rate – 1725cc/min @ 43.5 psi (3 Bar)
Maximum Differential Fuel Pressure – 101.5 psi (7 Bar)
Fuel Compatibility – Compatible With All Known Fuels
Electrical Connector – US-Denso *No Adaptor top, GTR lower spacer, 14mm bottom o-ring*
Shipping: FREE UPS Next Day Air or USPS Express Mail available! Just leave a note with your preference.
Was: $1,999.00
Sale: $1,827.00
Save: 9%
Save: $172.00

Qty:
Free Basic Shipping

Description

Included: 6 Injector Dynamics ID1700 fuel injectors. The photo is an example of a similar set.

The ID1700 is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700 was designed to fill the gap between the ID1300 and the ID2000, and like the ID1300, it features corrosion resistant internals making it compatible with all known automotive fuels.

A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700 immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700 excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.

These Injector Dynamics fuel injectors will fit many applications, including, but not limited to:

2007+ Nissan Skyline GTR (R35), VR38DETT

Specifications
Nominal Flow Rate – 1725cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 7 Bar (101.5 psi)
Fuel Compatibility – Compatible With All Known Fuels
Electrical Connector – US-Denso *Adaptor top, GTR lower spacer, 14mm bottom o-ring*
Injector Body Design: Metal and composite plastic
O-Rings Included: Yes, on the injectors
Length of injector from o-ring to o-ring: 48mm
Diameter of top o-ring / fuel rail bore: 14mm
Diameter or style lower o-ring or cushion: 14mm lower o-ring and machined aluminum spacer

Slope and Offset vs. Pressure data and tuning data for Motec M1 are available upon request.

Details

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping
  • FREE UPS Next Day Air or USPS Express Mail available! Just leave a note with your preference.

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST