TRE 60lb Bosch/Siemens Deka IV Style Fuel Injectors - 8

Included: 8 Thin Body Bosch style injectors. The photo is an example of a similar set.

See this video of us testing some TRE injectors on our ASNU flow bench:
TRE Fuel Injector ASNU Flow Testing

These High Resistance(Approx. 10 OHMS) Saturated fuel injectors will fit many applications, including, but not limited to:

BMW 5, 6, 7, and 8 Series V8 Models
BMW M5, X5, Z8, and Alpina B7 Models
Chevrolet Camaro, Caprice, Corvette and Impala
Chrysler, Dodge, and Jeep HEMI and SRT8 V8 Engines
Ford Mustang GT, lx, Cobra 5.0L and 4.6L
Lotus Esprit
Pontiac Firebird, GTO, and TransAm

Any BMW 8 cylinder model with Bosch EV1 or EV6 style injectors
Any Ford V8 Engine with Bosch EV1 or EV6 style injectors

These are Bosch style injectors which work on most top feed Bosch fuel injected vehicles.
Email us if you have questions regarding fitment.
Some vehicles may require fuel rail spacers or electrical connectors.

Note:
If your vehicle needs OBD1 style injector clips/plugs, please select them from the drop down menu above - additional $39.95.

Specifications
Typical Flow Rate in LB per hour: 60 LBS/HR @ 45 PSI
Typical Flow Rate in CC per minute: 630 CC/min @ 45 PSI
Actual flow rate of your injectors may vary, but will be matched together
Resistance: 10 ohms (High Impedance, High Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30 PSIG / Max 100 PSIG
O-Rings Included: Yes, on the injectors
Injector Body Design: Metal and composite plastic
Fuel Delivery: Upgraded single fuel delivery nozzle for superior fuel atomization
Electrical connector type: EV1 (Minitimer, Jetronic)
Overall Length: 2 7/8 inches, 74 mm
O-ring to O-ring Length: 2 1/2 inches, 63 mm
Diameter: 16 mm
Orings: Top and bottom, 14.5 mm
Warranty: 1 Year Warranty!

TREperformance Fuel Injector Guarantee:

TREperformance warranties all of our fuel injectors for 1 year from the purchase date. If you have any problems with your injectors we will test them and replace any defective injectors free of charge. Buy with confidence though, in years of selling these injectors we have seen virtually no injectors fail! If you feel any of your injectors may be defective just contact us via email to receive an RMA number and we will reply back with all the return instructions. No returns are accepted without an RMA number. All of our TRE Fuel Injectors are manufactured according to strict guidelines in order to maintain ISO 9002 and ISO/TS 16949 quality system certifications.

TREperformance manufactures these fuel injectors and has each injector tested before shipment. These brand new, recently developed fuel injectors are always in stock and will often ship the day of payment. Save some money and try our TRE Fuel Injectors. We back them with a 1 year warranty! Thank you for considering TREperformance Fuel Injectors!