Click on image to zoom
Acura Integra 310cc Fuel Injectors 1986-1991
SL2-310
These RC Engineering 310cc High Resistance Saturated fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles:
1986-1991 Acura Integra
Must remove OEM resistor box and use OBD1 style injector connecting plugs
Part # SL2-310
1986-1991 Acura Integra
Must remove OEM resistor box and use OBD1 style injector connecting plugs
Part # SL2-310
Description
Included: 4 Honda style injectors, spacers and flow sheets. The photo is an example of a similar set.
Note:
If you need new OBD1 Bosch EV1 center notch style injector clips they are available - additional $19.95.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 310CC/min @ 43.5 PSI
Flow Rate in LB per hour: 305LBS/HR @ 43.5 PSI
Resistance: 12.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: SL2-310
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!
Note:
If you need new OBD1 Bosch EV1 center notch style injector clips they are available - additional $19.95.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 310CC/min @ 43.5 PSI
Flow Rate in LB per hour: 305LBS/HR @ 43.5 PSI
Resistance: 12.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: SL2-310
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W5.0000” x H5.0000” x L5.0000”
- Free Basic Shipping
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
