TRE 1000cc Honda / Denso Style Fuel Injectors - 4

Included: 4 Honda / Denso style injectors. The photo is an example of a similar set.

These Low Resistance(Approx. 2.5 OHMS) Peak and Hold fuel injectors will fit many applications, including, but not limited to:
1986-2001 Acura Integra
1988-2000 Honda Civic
1992-2001 Honda Prelude
1990-2005 Mazda Miata
1986-1992 Mazda RX-7
ALL Mitsubishi Eclipse Turbo (4G63T)
ALL Mitsubishi Lancer Evolution (Models 1-9 including EVO VIII, IX)
Eagle Talon Turbo 4G63T
Lotus Exige and Elise
Plymouth Laser Turbo 4G63T
Scion tC and xB
Toyota Celica GTS and MR2
ANY 4G63T Engine
These are Denso style injectors which work on most top feed Denso or Honda fuel injected vehicles.
Email us if you have questions regarding fitment.

Note:
These have OBD1 EV1 Square plug center notch electrical connections. If your vehicle needs to convert to OBD1 style injector clips/plugs, please select them from the drop down menu above - additional $19.95.

Specifications
Flow Rate in CC per minute: 1000 CC/min @ 43.5 PSI
Flow Rate in LB per hour: 95 LBS/HR @ 43.5 PSI
Resistance: 2.5 ohms (Low Impedance, Low Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 4.0 Amps/ Hold 1.5 Amps
Pressure: Min 30 PSIG/ Max 100 PSIG
O-Rings Included: Yes, on the injectors
Fuel Delivery: Dual Cone Spray Pattern
Electrical connector type: EV1 (Minitimer, Jetronic)
Overall Length: 3 inches, 76 mm
Top O-ring: 11 mm

TREperformance Fuel Injector Guarantee:

TREperformance Inc. warranties all of our fuel injectors for 1 year from the purchase date. If you have any problems with your injectors we will test them and replace any defective injectors free of charge. Buy with confidence though, in years of selling these injectors we have seen virtually no injectors fail! If you feel any of your injectors may be defective just contact us via email to receive an RMA number and we will reply back with all the return instructions. No returns are accepted without an RMA number. All of our TRE Fuel Injectors are manufactured according to strict guidelines in order to maintain ISO 9002 and ISO/TS 16949 quality system certifications.

TREperformance Inc. manufactures these fuel injectors and has each injector tested before shipment. These brand new, recently developed fuel injectors are always in stock and will often ship the day of payment. Save some money and try our TRE Fuel Injectors. We back them with a 1 year warranty! Thank you for considering TREperformance Fuel Injectors!