AFR 210cc LSX Cylinder Heads, 66cc Chambers, With Parts
AFR 1510
AFR's 210cc LSX heads are the preferred choice over re-worked factory heads. They feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings, Titanium retainers and high quality components throughout. Recommended for street, towing, or street/strip engines with displacements up to 383 cubic inches, operating up to 6300 RPM. Requires minimum 3.900 bore size for intake valve clearance. Legal for 2005 and older emissions controlled vehicles under CARB EO #D-250-4. Component upgrade and machining options are available to customize AFR Heads to your specific build.
Shipping: FREE continental USA ground shipping on ALL AFR Cylinder Heads
Was:
$3,012.26
Sale:
$2,712.26
Save:
10%
Save:
$300.00
Description
Designed specifically for 3.900 Bore LSX engines.
For the ultimate high performance street LS1/LS2/LS6 aluminum cylinder head AFR’s all new 210cc emission legal heads (E/O # D250-4) are your only choice. Specifically designed for 1997 to present Gen-3 Chevy Corvettes, Camaros, and trucks using a 3.900 Bore. AFR’s LSX cylinder head offers unmatched flow performance (302 CFM at .600lift) and features 2.020" intake and 1.600" exhaust valves with AFR’s iron ductile interlocking valve seats. With only 210cc port volume (nearly identical to a stock LS1 head) this is an incredible 70 CFM increase over stock casting, creating unbelievable port velocity and performance. The 210cc cylinder head is ideal for naturally aspirated 346 CI to 396 CI engines. It comes standard with 66cc combustion chambers. AFR’s LSX is a direct bolt on, no special parts required. Structural features like Air Flow Research’s trademark 3/4” thick head deck, a must for blown and nitrous applications, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. An exclusive new modern combustion chamber design with double quench pad area helps the LSX generate huge low and mid lift airflow numbers. If you need a snake charmer for that pesky neighborhood “Cobra Mustang” look no further!
Note: Hydraulic roller cams in "LS" Gen III engines typically experience valve float at 6600-6800 RPM's. If you are using aftermarket rocker arms valve float will become prominent and AFR highly recommends upgrading to the AFR part #8019 spring. If you plan on running over .600 gross valve lift and/or 6600 RPM, AFR suggests you upgrade your springs to AFR part #8019. The upgraded springs have higher seat and open pressures (155/410+) to better reduce the risk of valve float in more aggressive applications.
Note: LSX bead locks and aftermarket bead locks are not interchangeable. GM made their bead lock radius and depth different. AFR locks are the same as GM LSX.
Basic Package Components | Part # |
100%
CNC
Ported Combustion Chambers 100% CNC Ported Exhaust Ports 100% CNC Ported Intake Ports Competition 3-angle Radiused Valve Job |
|
8mm Bead Lock Intake Valve, 2.020” x 4.900" Overall Valve Length | AFR #7207 |
8mm Bead Lock Exhaust Valve, 1.600” x 4.900" Overall Valve Length | AFR #7228 |
PAC
Racing Spring 1.290" OD Hydraulic Roller Dual Valve
Spring, 140 lbs on seat, .600" maximum lift, Max RPM 6300-6500 |
AFR #8017 |
*LSX bead locks and aftermarket bead locks are not interchangeable. GM made their bead lock radius and depth different. AFR locks are the same as GM LSX. | *Notes |
7° Titanium Retainers 1.245" O.D x .885" I.D x .655" I.D | AFR #8512 |
7° Bead Lock Valve Keepers | AFR #9007* |
Viton Valve Seals .600" O.D x .495" I.D | AFR #6612 |
Hardened Valve Spring O.D Locator 1.380" O.D x .570" I.D | AFR #8042 |
Ductile Iron Intake Valve Seats 2.131" O.D x 1.680" I.D x .375" Deep | AFR #9059 |
Ductile Iron Exhaust Valve Seats 1.650" O.D x 1.350" I.D x .375" Deep | AFR #9069 |
8 mm Bronze Valve Guides .502" O.D x 2.100" O.A.L | AFR #9051 |
Specifications, Features, and Optional Supporting Components |
Head Torque | 11mm ARP 70ft. lbs. w/ Moly |
Head Torque | 8mm 23ft. lbs. w/ Moly |
Exhaust Port Gasket | GM#12558573 |
Intake Port Gasket |
GM or FAST |
Head Gasket, Cometic 3.930 .040" | AFR #6846 |
Head Bolts (97-03) | AFR #6330 |
Head Studs (97-03) | AFR #6331 |
Head Bolts (04+) | AFR #6334 |
Suggested Manifold |
FAST 90mm,
92mm, or 102mm
|
Intake Port Volume | 210cc |
Exhaust Port Volume | 84cc |
Combustion Chambers |
66cc
|
Spring Pocket |
1.510"
O.D to1.525, no deeper
|
Valve Spacing | Stock |
Head Bolt Washers, Manley | AFR #6320 |
Valve Angle | 15° |
Flat Mill (Milling options available) | .006" per cc 58cc Maximum |
Important:
Do not
port match you intake manifold to any Fel-Pro
gasket as it does not
precisely match AFR heads.
Note: Milling head deck will affect flow numbers.
Details
- AFR 1510
- AFR 1510
- Air Flow Research
- New
Categories
Shipping Information
- Item Requires Shipping
- 65.0 lbs.
- W12.0000” x H12.0000” x L24.0000”
- Free Basic Shipping
- This item ships in its own box.
- FREE continental USA ground shipping on ALL AFR Cylinder Heads
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST