Click on image to zoom

Dodge Neon SRT-4 1600cc Fuel Injectors

PB2-1600
These RC Engineering 1600cc Low Resistance Peak and Hold fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles:

ALL Dodge Neon SRT-4

Part # PB2-1600

Description

Included: 4 Bosch style injectors, spacers and flow sheets. The photo is an example of a similar set.

Notes:
1) You must have your computer setup for low impedance.
2) If your vehicle still has the stock OBD2 style injector clips you will need new OBD1 style injector clips which are available - additional $19.95.

Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes

Specifications
Flow Rate in CC per minute: 1600CC/min @ 43.5 PSI
Flow Rate in LB per hour: 152LBS/HR @ 43.5 PSI
Resistance: 5.0 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 2.5 Amps / Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PB2-1600
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!


Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping
  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST