Fore Innovations 2005-2010 Jeep Cherokee WK1 SRT-8 Dual Pump Fuel Pump Billet Module - 1200+rwhp Capable

What's included in the base system?
Billet Top Hat
Polymer Dual Fuel Pump Holder
Wires for OE sensors (such as level, temperature) with bullet connectors to be reconnected to OE harness
6 inches of insulated pump power wire protrude from top of hermetic seal with bare ends

*This system does NOT include feed fittings, return fittings, fuel pumps, fuel pressure regulator, fuel lines or fuel pump filter.

Module Specs:
Feed Port: Female -10 o-ring
Return Port: Female -8 o-ring
Pump Power Wires: 12 AWG stranded copper, one pair per pump
Dual pump module (Capable of supports 1200+ rwhp)
Use with upgraded fuel lines only
E85 and race fuel compatible (see pump manufacturer recommendations on fuel compatibility)
O-ring feed and return ports
Multiple fuel pump options to accommodate 1200+ rwhp
Anodized black for maximum corrosion resistance
Polymer pump support minimizes pump noise and eliminates electrolysis

Fitment:
2005-2010 Jeep Cherokee WK1 SRT-8

Fuel Type:
Gasoline / race gas: choose if you are will only be running typical pump gas or race gasoline, such as MS109, C16, Q16, etc.
Ethanol blends, gasoline, race gas: choose if you will be running a combination of gasoline, race gas, E85, E98, E85R, C85, etc.

Frequent Asked Questions

Q: Should I select the FC2 or FC3 controller?
A: FC2: controller can only operate two pumps simultaneously, using OE or aftermarket switching signal. Best for controlling two small fuel pumps for street duty, or two large fuel pumps for track use only.

FC3: controller can run 1, 2, or 3 pumps full time, with remaining pumps activated on demand. Requires external switch (i.e. Hobbs, RPM, etc) best for controlling two or three large fuel pumps for street duty and minimizing heat.