Fore Innovations 2015-2023 Dodge Hellcat 6.2L Dual Pump LX Fuel Pump Billet Module Returnless - 1000rwhp on gas (Returnless)
This system can be used in both returnless and return style fuel systems for returnless systems. For return style systems you are required to use external feed and return lines, external filtration (for injectors), external regulation, and an upgraded electrical system. Upgraded fuel rails and an inline check valve is recommended. For returnless style systems you must select the plug for the return fitting when selecting your systems fittings.
This product has many options see the blue "choose product options" to configure your system and avoid any delays!
Note: This system does NOT include feed fittings, return fittings, fuel pump or fuel pump filter they can all be added using the product options.
Description
This is a stand alone fuel system. Professional installation and a custom tune is required. Qualified installers and tuners must be able to interface to the OE harness and FPDM (if required), understand proper component placement, hose routing, and deliver the vehicle with factory-like pump prime/on/off logic with no error codes. Fore Innovations will supply basic system schematics and detailed component level instructions, and can provide troubleshooting of the performance and function of our system and components.
What's included in the base system?
Billet Top Hat
Billet Fuel Pump Holder
6 inches of insulated pump power wire protrude from top of hermetic seal with bare ends
Wires for OE sensors (such as level, temperature) with bullet connectors to be reconnected to OE harness
Return-line plug
Dual pump power pigtails
*Does NOT include fittings, fuel pumps or fuel pump filters they can all be added using the product options.
Fitment:
2015-2023 Dodge Challenger 6.2L
2015-2023 Dodge Charger 6.2L
*will NOT fit Demon or SRT/RT models!
Additional Notes:
Pressure regulation and flow output is [in car] electronic, so performance troubleshooting must be accomplished by the tuner and/or installer. (we cannot support)
In-tank fine filtration is removed, so external, inline fine filtration must be added for the safety of the injectors. A second OE FPDM must be used and implemented to drive the second pump.
Details
Shipping Information
- Item Requires Shipping
- 50.0 lbs.
- W7.0000” x H6.5000” x L8.2500”
- Free Basic Shipping
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
