Fore Innovations 2018+ Ford F-150 L1E Dual Pump Drop-In Return-Style Fuel System - 800+rwhp Capable (Post-Regulated | Rails Series Feed)

FI-91-621E
In Stock
Pricing: $2,090.00

Free Basic Shipping

Customize Your Item

0 of 17 required chosen

Set 1 of 17Electrical Upgrade OptionsRequired

Set 2 of 17Your Bed SizeRequired

Set 3 of 17Your Cab SizeRequired

Set 4 of 17Your Fuel Tank SizeRequired

Set 5 of 17Fuel Filter OptionsRequired

Set 6 of 17Flex-Fuel OptionsRequired

Set 7 of 17Fuel Pressure Gauge OptionsRequired

Set 8 of 17Fuel Line TypeRequired

Set 9 of 172nd Fuel Pump OptionsRequired

Set 10 of 17Fuel Pump OptionsRequired

Set 11 of 17Fuel Rail OptionsRequired

Set 12 of 17Fuel TypeRequired

Set 13 of 17Honeywell Switch OptionsRequired

Set 14 of 17Manifold Fitting TypeRequired

Set 15 of 17Regulator OptionsRequired

Set 16 of 17AN Wrench OptionsRequired

Set 17 of 17VIN If Known:Required

Qty:
0 of 17 required chosen
Fore Innovations 2018+ Ford F-150 L1E Dual Pump Drop-In Return-Style Fuel System - 800+rwhp Capable (Post-Regulated | Rails Series Feed)
$2,090.00
Need help matching a part number? Call 877-514-9494.
The Fore Innovations 2018+ Ford F-150 L1E Dual Pump Fuel Pump Return-Style Fuel System is now available. This module will fit in the OEM fuel tank requires interfacing the OE harness and FPDM in certain applications.. The module consists of a billet top-hat, wiring and pump holder. These components work together to deliver the flow you need and the OEM functionality you want. This system can handle up to 800rwhp on e85 and 900rwhp on gas Supplies. Recommended to run one pump full time, then activate secondary pump under load. Supplies High Pressure Fuel Pump (HPFP) and port injection (and small wet nitrous) Includes in-tank supply system that retains OE transfer, fuel level sender, and EVAP functionality, upgraded feed and return lines, high capacity filtration and check valve, flow through t-block direct mounted on HPFP inlet tube, high capacity F2i regulator with provisions for both static and MAP reference. Includes our billet fuel rails for proper port injection supply with E85.

This product has many options see the blue "choose product options" to configure your system and avoid any delays!

Note: This system does NOT include fuel pumps or fuel pump filter they can all be added using the product options.

California Residents: Prop 65 Warning

WARNING: Cancer and Reproductive Harm

Description

This is a stand alone fuel system. Professional installation and a custom tune is required. Qualified installers and tuners must be able to interface to the OE harness and FPDM (if required), understand proper component placement, hose routing, and deliver the vehicle with factory-like pump prime/on/off logic with no error codes. Fore Innovations will supply basic system schematics and detailed component level instructions, and can provide troubleshooting of the performance and function of our system and components.

What's included in the base system?
F-150 Mustang Dual Pump Module
Billet fuel rails
F2i Fuel Pressure Regulator (may be configured boost reference or static)
T-block to direct mount on HPFP (High Pressure Fuel Pump)
88mm Cellulose Fuel Filters (upgrades available in the product options)
All fittings, hose, hardware required for typical fuel line plumbing

*Does NOT include fuel pumps they can all be added using the product options.

Fitment:
2018+ Ford F-150

Fuel Type:
Gasoline / race gas: choose if you are will only be running typical pump gas or race gasoline, such as MS109, C16, Q16, etc.

Ethanol blends, gasoline, race gas: choose if you will be running a combination of gasoline, race gas, E85, E98, E85R, C85, etc.

Fuel Pressure Settings:
1. Fuel pressure with static fuel pressure regulation must be set to [43 psi + maximum boost] or 54 psi (whichever is greater).
2. Fuel pressure with manifold referenced fuel pressure regulation must be set to 54psi during idle. (boost signal after throttle body)
3. Fuel pressure with boost referenced fuel pressure regulation should be set to 58 psi with vacuum off. (boost signal before throttle body)
4. Use L2 fuel system to operate outside these parameters.

Frequent Asked Questions

Q: Can I use this system with E85?
A: Yes, as long as you select microglass ssd or stainless filter element and select E85 rated fuel pumps.

Q: What do I need to add a Flex-Fuel sensor to this system?
A: Fore offers flex-fuel intercept fittings that uses a GM/Continental style flex-fuel sensor which is good for those making 1100 HP if you're making over 1100 HP we recommend the AFD E-Sense Billet Sensor which can have fittings up to -12 AN which is capable of handling 2000+ HP.

Q: What kind of fuel pump controller should I use?
A: FC2: controller can only operate two pumps simultaneously, using OE or aftermarket switching signal. Best for controlling two small fuel pumps for street duty, or two large fuel pumps for track use only.

FC3: controller can run 1, 2, or 3 pumps full time, with remaining pumps activated on demand. Requires external switch (i.e. Hobbs, RPM, etc) best for controlling two or three large fuel pumps for street duty and minimizing heat.

Aeromotive ReturnX Standalone Pulse Width Modulation (PWM): The best overall option, this controller offers true variable-speed control, running the pump(s) at 45-75% power during idle and cruising, then smoothly ramping additional pumps up to full output as demand increases. This reduces heat in both the fuel and the pump(s), extending pump life and significantly reducing vapor lock risk. The system is MAP-based, using vacuum reference for naturally aspirated applications or boost reference for forced induction applications. Does NOT require an external switch.

Q: Should I select the F2i fuel regulator or F4i regulator?
A: F2i: The standard option included in most kits. Features 2 ORB-8 pressure ports, 1 1/8" NPT auxiliary port, 2 1/8" NPT map reference ports, and 1 ORB-8 return port. Ideal for most builds not running additional or DI fuel rails. Note: additional fittings or blocks may be needed in tight routing situations.

F4i: The best option when running fuel rails and DI rails simultaneously into a single regulator, 16-injector dual fuel rail setups, or supplying fuel to a nitrous system. Features 2 ORB-8 + 2 ORB-10 pressure ports, 2 1/8" NPT map reference ports, and 1 ORB-10 return port. Note: Some installations are simplified when using the F4i regulator as having the 4 pressure ports can eliminate use of extra fittings or blocks making for a cleaner less expensive fittings combo.

Q: What is the difference between PTFE and RH235 Fuel Hose?
A: PTFE Hose: Lasts indefinitely with all fuel types and is non-permeable (no fuel odor in enclosed spaces). Downsides are longer installation times, stainless steel outer braid can scratch surfaces and make noise/vibrations.

Red Horse 235 Hose (RH235): Features nylon outer sleeve protects surfaces and reduces noise/vibration and they're faster to assemble. Downsides are they only have a 5–7 year service life and requires a cable cutter to cut.

Fitment

Details

Shipping Information

  • Item Requires Shipping
  • 50.0 lbs.
  • W7.0000” x H6.5000” x L8.2500”
  • Free Basic Shipping