Additional Images
Edelbrock Universal Pro-Flo 4 Standalone ECU & Harness - No Distributor
EDL-35721
The Pro-Flo 4 Standalone ECU and Harness Kit (PN 35721) provides an economical EFI system solution ideal for legacy Pro-Flo EFI system users or those with an existing yet poor-performing competitor EFI system looking to convert to PF4 EFI. This kit can be used with any application for which Edelbrock offers a Pro-Flo 4 Distributor.
The Standalone EFI kit comprises the ECU, supporting sensors, a wide-band O2 sensor, and the wiring harness. The ECU controls both fuel and spark and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock’s E-Tuner Software for IOS and Android tablets and cell phones. The software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc.
The Standalone EFI kit comprises the ECU, supporting sensors, a wide-band O2 sensor, and the wiring harness. The ECU controls both fuel and spark and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock’s E-Tuner Software for IOS and Android tablets and cell phones. The software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc.
Pricing:
$1,126.95
Description
The customer must purchase a Pro-Flo distributor (specific to the application) and provide the induction system, EFI manifold, throttle body, 1-bar MAP sensor, fuel rails, injectors, pump, regulator, and lines. Users must refer to the Calibration Matrix in the instructions for the required injector size, depending on engine cubic inches and HP requirements. Required injector sizes 29 lb./hr., 35 lb./hr., 42 lb./hr., and 60 lb./hr. Compatibility with forced induction applications requires 80 lb./hr. injectors and a 2-bar MAP sensor.
Details
- EDL-35721
- EDL-35721
- Edelbrock
- New
Categories
Shipping Information
- Item Requires Shipping
- 45.0 lbs.
- W8.0000” x H8.0000” x L24.0000”
- Free Basic Shipping
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
