BTR Gen V L83/L8B/L82/L84 5.3L Truck Stage 1 Supercharger Camshaft with Valve Train Upgrade & DOD/AFM/DFM Delete Kit

BTR-DODL83/L84-SC1
In Stock
Was: $1,609.03 SALE
Sale: $1,509.03
Save $100.00 (6%)

Free Basic Shipping

Customize Your Item

Set 1 of 22DOD Conversion Plug OptionsOptionalNo Thanks

Set 2 of 22Pushrod OptionsOptionalNo Thanks

Set 3 of 22Air Induction OptionsOptional

Set 4 of 22Cam Install KitOptional

Set 5 of 22VVT Style OptionsOptionalNo Thanks

Set 6 of 22Head Bolt/Stud OptionsOptionalNo Thanks

Set 7 of 22High-Side Pump Gasket OptionsOptional

Set 8 of 22DI Injector OptionsOptional

Set 9 of 22Intake Manifold OptionsOptional

Set 10 of 22Oil Pan/Pump Seal OptionsOptional

Set 11 of 22Valve Holding Tool OptionsOptional

Set 12 of 22Cam Retainer Plate OptionsOptional

Set 13 of 22Rocker OptionsOptional

Set 14 of 22Valve Spring Kit OptionsOptionalNo Thanks

Set 15 of 22Spark Plug Wires OptionsOptional

Set 16 of 22Timing Chain OptionsOptional

Set 17 of 22Balancer Bolt OptionsOptional

Set 18 of 22Tuning OptionsOptional

Set 19 of 22Valve Cover OptionsOptional

Set 20 of 22VVT Phaser Bolt OptionsOptional

Set 21 of 22Lifter OptionsOptionalNo Thanks

Set 22 of 22VVT Tool OptionsOptionalNo Thanks

Qty:
BTR Gen V L83/L8B/L82/L84 5.3L Truck Stage 1 Supercharger Camshaft with Valve Train Upgrade & DOD/AFM/DFM Delete Kit
$1,609.03$1,509.03
Need help matching a part number? Call 877-514-9494.
This BTR camshaft and DOD/AFM/DFM delete kit includes everything needed to install including the world renown Gen V Stage 1 supercharger camshaft. Whether your project involves turbocharged, supercharged, or naturally aspirated setups, BTR offers numerous options, all supported by years of expertise, knowledge, and a dedication to power. This cam works well in 5.3L engines using Centrifugal (ex. ProCharger) or twin-screw style blowers (ex. Whipple, Magnuson), yet keeps great street manners and makes more power than similar cams with more duration.

Note: L83 and L84 use different DOD plugs use the options to select your engine type, this kit has many product options please make sure you see the blue "choose product options" button to configure your system and avoid any delays.

Important Information: This kit has many options to add or remove parts use the blue "choose product options" button. To install these parts a new crankshaft bolt is required. Camshaft VVT bolt is highly recommended as it can only be reused a few times and many techs like to always install new ones. ARP bolts/studs are reusable not torque-to-field.

*For those who want short travel lifters for 6500+ rpm applications, you need to read the instructions on the PN: Morel-7790 page. Using the documents tab as they are very specific. Pushrod size will not be the stock 7.850" size you must measure.


See below for high side fuel pump Lash Cap information!

California Residents: Prop 65 Warning

WARNING: Cancer and Reproductive Harm

Description

A lash cap is commonly used on the high pressure fuel pump when using aftermarket camshafts with 32-38% fuel lobes which feature smaller base circle of the fuel lobe the lashcap is used to make up the slack. The lash cap is only required when using L83/L84/L86/L87/LT1 high pressure fuel pump if you are using the higher flowing LT4 pump a lash cap is not required in most applications but measuring is still required. 

When choosing a lash cap it is not a simple one fits all situation, measuring is required to prevent the fuel pump from bottoming out and causing damage. If you are unsure how to measure or how to install the lash cap CLICK HERE for a forum post with a great explanation. These are the commonly used lash-cap options PN: 633-1 for .80" thick lash cap or PN: 12596509 for .60" thick lash cap. *in rare situations a lash cap is not needed, when using an aftermarket valley cover a different size lash cap maybe required.

What is included with the this system?
BTR Gen V Stage 1 Supercharger Camshaft 
BTR .660 Lift Dual Platinum Valve Spring Kit - Upgrades Available
BTR 7.850" 3/8 Stock Size Pushrods (Other sizes or length checkers available in the product options)
BTR VVT Lockout and Cam Motion Phaser Tool
CBI Street Cars DOD/AFM/DFM Plugs (Select L83 or L84 DOD plugs using the product options)
BTR Delphi LT Lifters (Short travel high RPM lifters available in the product options)
BTR Lifter Trays - set of 4
BTR Gen V L83/L84 Head Gaskets - Pair
BTR Gen V Head Bolt Kit (Head studs available in the product options)
BTR Gen V Header Gaskets - Pair

Camshaft Specs
Cam Style: Hydraulic roller, OE roller
Camshaft Use: Street/Strip 
Camshaft Duration: 217/23X
Valve Lift with Factory Rocker Arm Ratio: 0.639 int./0.639 exh.
Fuel Lobe Percentage: 38% (measure to see if a Lash Cap is needed)
Torque Converter Information: Can be used with factory converters but aftermarket torque converter is highly recommended 
Lobe Separation (degrees): 114 

Vehicle Fitment:
2014+ Chevy Silverado 5.3L 
2014+ GMC Sierra 5.3L 
2015+ Chevrolet Tahoe 5.3L 
2015+ Chevrolet Suburban 5.3L
2015+ GMC Yukon/Yukon XL 5.3L
Gen V L83 or L84 Crate Engine

Fitment

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 35.0 lbs.
  • W24.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping