Additional Images

BTR LT Truck Trinity Cast Aluminum Intake Manifold W/ Injector Holes - Natural Finish

TRA-LTTK-INJ
The latest offering from BTR in high quality cast aluminum intake manifolds! The Trinity is a short runner, 3-piece design that allows for the ultimate in application flexibility. Optimum operating range is 6000-8500 rpm and is primarily intended to bridge the gap between N/A and Boosted applications. It utilizes the high LT1 throttle body position and will accept DBW 103MM Nick Willams throttle bodies, but yet it will fit in the tight confines of the C7, C6, C5 Corvette as well as the popular F-body platforms.

The design incorporates 2 runners and an interchangeable plenum. The seal is generated by 8 entrapped o-rings at the runner/plenum interface, and is clamped by 20 -M6 Stainless steel socket head cap screws. The port seals are SAE o-rings seated in a dovetailed o-ring groove. Both the port mouth radius and the port match is CNC machined. The Trinity incorporates 2-1/4 -27 NPT ports on the side of the throttle body boss and a 3/8-18” NPT on the rear. The manifold comes semi-assembled and includes all the hardware required to bolt it on.

Note: Intakes With Injector holes require fuel rail kit, Optional NW 103MM throttle bodies, EVAP Adapter & LT4 Fuel Line available, click the blue product options button to configure your intake!

*This intake will require BTR's fuel rail kit, click the blue product options button, Intake will include injector holes picture is for reference
Was: $1,199.99
Sale: $999.99
Save: 17%
Save: $200.00

Customize Your Item

- EVAP Adapter Options -
- Fuel Line Options -
- Throttle Body Options -
- Fuel Rail Options -
Qty:
Free Basic Shipping

Description

Intake Manifold Specs
Part Number: TRA-LTTK-INJ
Intake Section Included: Complete
Basic Operating RPM Range: 6000-8500
Head Port Type: LT Truck
Intake Color: Natural 
Intake Material: Aluminum
Injectors Holes: Yes, Requires Fuel Rail Kit
Intake Mouth Size: 103MM
Throttle Body Compatibility: DBW
Port Mouth Radius / Port Match: CNC Machined
Notes: Includes mounting hardware.
 
Additional Notes
Will NOT work with LT4 cylinder heads!
To use this manifold on a L83 engine, a L86/LT1 or 103mm aftermarket throttle body is required.
Fuel rails are required for the gen v LT truck intakes with injector provisions. 
LT4 fuel line is recommended for optimal clearance PN# 12663577 or click on the blue product options button

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 25.0 lbs.
  • W12.0000” x H12.0000” x L24.0000”
  • Free Basic Shipping

Documents


  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST