AFR 180cc Eliminator SBC Bare Cylinder Heads, 75cc Chambers, Angle Plug, No Parts

The Small Port, High Velocity Torque Monster! - Information below is referring to fully assembled heads.
The AFR Emissions Legal (versions from 1969-94 with heat riser, CARB EO #D-250-2), 180cc intake port small block Chevy cylinder heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4" thick head deck (ideal for nitrous or blower applications.) Standard valves are lightweight 8mm 2.020 intake and 1.600 exhaust with AFR's hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of idle to 5500 rpm (higher rpm ranges possible depending on combination of parts), 23? valve angle, and standard valve spacing make this the perfect street aluminum cylinder head for 327 cid to 350 cid engines from 1955-86. Also available for 1987 to present engines with center bolt valve covers and 2 center intake bolts at 72? angle, AFR Part #0919. No special parts are required. Vortec style cylinder heads available also, AFR Part #0912. Drilling for centerbolt valve covers available as an option.
The exhaust ports are raised .100" over a standard GM L-98 cylinder head.

Note:
Hydraulic roller cams typically experience valve float at 6000-6200 rpm because of their fast ramp rates. AFR suggests you upgrade your springs to AFR part #8019, 1.270 O.D. with higher spring pressures to reduce chances of valve float associated with rpm's 6200 or higher, but smaller cams with less than .500 lift can rev to 6500 rpm with the included springs.

Important: Do not port match you intake manifold to any Fel-Pro gasket as it does not precisely match AFR heads.
Note: Milling head deck will affect flow numbers.