Whipple Ford Raptor R 5.2L 2023+ Gen 6 3.8L Supercharger Intercooled Tuner Upgrade Kit
Our comprehensive system includes a precision-machined, 132mm billet throttle body and a high-flow oversized air filter, ensuring your engine has access to all the air it needs. However, the crown jewel of our system is the patented intercooler design. The discharged air circulates through each intercooler twice, effectively doubling the cooling capacity compared to the stock IC core. The dual cores feature a 1-inch capacity for both inlet and outlet, allowing nearly double the water flow. Additionally, the oversized lid is expertly designed to maintain air velocity, optimizing the Coyote engine's output.
Aside from the tuning this system is 100% complete, including Whipple's Gen 6 3.8L supercharger, Billet 132mm high flow throttle body, New flat panel air filter and all the pre-formed & fitted hoses with all the necessary wiring connectors for a easy installation.
Description
There are many options available for Whipple Supercharger kits. If you have any questions please email [email protected] or call 760-586-5617.
These supercharger kits are the most complete available, including everything needed for installation. This includes all mounting brackets for the blower, pullies, belts, intercooler, all the tubing, piping, fittings and clamps and even oil for the self contained lubricating system. You do not need to make any major modifications or purchase special tools or other parts. Many customers install in their garage or driveway over a weekend.
DETAILS:
Horsepower: Depends on tuning, Blower is capable of 2000HP Standard or 2250HP+ with 3rd party race porting
Results may vary depending conditions, dyno, octane and vehicle modifications. 91 octane will always result in lower power than 93.
Gen 6 3.8L supercharger head unit, 15 psi, upgrades available
Highly effective air-to-water intercooler
Fuel Pump Supplied: None Supplied
Fuel Injectors Supplied: None Supplied
Computer/Ignition Mods.: None Supplied
Throttle Body: Billet 132MM High Flow Throttle Body
The most power per pound of boost on the market!
Easy and quick installation
System is 100% complete with OEM quality and appearance
Dual Air Boxes & Dual Filters mated to a single Throttle Body
Complete With All Necessary Parts & Hardware For Installation
No Internal Modifications Required
TREperformance is an Authorized Installing Dealer of Whipple Superchargers.
Largest intercooler system on the market, featuring patented dual core, dual pass technology
Billet 132mm high flow throttle pre-set with factory electronics
No other upgrades required, just massive power right out of the box
Front entry Gen 6 (3.8 liters/3800cc) Whipple twin-screw supercharger that significantly outperforms competitions 2.65L roots-type systems
Gen 6 supercharger features new 3x4 rotor combination for increased RPM capacity, large diameter for increased airflow and small leak path, increased helix for optimal sealing
3.8L is 43% larger than 2.65L roots-type allowing lower power draw and lower discharge temps to flow the same amount of air (more power to the rear wheels)
Oversized Crusher™ 150mm inlet for maximum airflow capacity and minimal rotor cavitation
Inverted design allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas
Patented dual core, dual pass intercooler technology with massive dual 1" inlet port capacity
Massive air-to-water aluminum bar-plate intercoolers (over 55% larger than some competition) offer more cooling than any other positive displacement system available, nothing comes close
Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy
Exclusive 3x4 rotor combo for significant increase in airflow under the curve than less efficient 4x4 roots
Extra plenum volume below intercooler core for far less pressure drop and better use of the increased surface area of the massive intercooler core
More boost at the "hit" than any other twin-screw
Fits under factory hood with no modifications
No cutting or grinding on the engine block
No internal modifications required
Kits come complete with all necessary parts and hardware for installation
Plug and play wiring with male and female connections
Proven 8-rib belt system with adjustable idler system
OEM quick connect fittings for easy installation
Complete kits and competition kits are available
Available in wrinkle black, red, white, polish, Ford textured blue or any custom color
Instant boost at the touch of the throttle
3 minute pulley changes
Lightweight pocketed 6061 T6 billet aluminum SC pulley
Details
- WK-2350-38-NFT
- WK-2350-38-NFT
- Whipple Superchargers
- New
Categories
Shipping Information
- Item Requires Shipping
- 75.0 lbs.
- W18.0000” x H18.0000” x L32.0000”
- Free Basic Shipping
- This item ships in its own box.
- FREE continental USA ground shipping on ALL Whipple Supercharger Systems!
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
