Aerospace Ford Mustang 2005-2014 4 Piston Rear Heavy Duty Drag Disc Brakes With Strange C-Clip Eliminators (A1098) - 1/2" Studs

This kit will drastically reduce the weight of your brakes and are worth at least 1/10 in the quarter, but are strictly for drag racing use because the rotors are not vented and will warp under street driving use. If you need brakes for street use, take a look at our Aerospace street brakes for your vehicle. These are the brakes which Aerospace recommends For Cars Under 3000lbs. When Measuring Axle Offset For C-Clip Eliminators Measure From Outside of Axle Flange To Backside Of C-Clip Eliminator Block And Then Add .250" (1/4)

This kit does NOT include vented rotors standard, so you cannot use these brakes for street driving because it will warp the rotors.

Brake Kit Includes:
Billet Aluminum 4 Piston Calipers
Billet Aluminum Hats
Drilled For 1/2" Wheel Studs
4 1/2, 4 3/4, 5" Multi Drilled 5 Lug Patterns
Hawk Performance Brake Pads
11 3/8 Diameter, 5/16 Thick Drilled Rotors
Billet Aluminum Mounting Brackets
Grade 8 Hardware
Meets All NHRA/ IHRA Requirements

Fits:
Fits: 8.8 Ford Housing Ends With Strange A1098/ 99 C-Clip Eliminators and Factory Equipped ABS Rear End

Notes:
Fits 15" Wheels With a 13.150" Inside Diameter or Larger
This kit is NOT equipped with a parking brake!