FIC 2150cc High Z Flow Matched Fuel Injectors for Mitsubishi DSM 90-98 & Evo 8-9 03-07 - Set of 4

Included: 4 FIC Denso Plug Tall injectors, part number IS126-2150H. The photo is an example of a similar set.

Fuel Injector Clinic's 2150cc/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.

The 2150cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85!

CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.

Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.

This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.

This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.

Specifications
Bottom O-ring Outer Diameter 16mm Square Seal
Cylinder Quantity 4
Height 64mm
Impedance High-Z
Top O-ring 11mm

Horsepower supported:
WHP on E85 at 43psi 90%DC NA 963.96
WHP on E85 at 43psi 90%DC Supercharged 876.32
WHP on E85 at 43psi 90%DC Turbo 803.30
WHP on E85 at 58psi 90%DC NA 1113.37
WHP on E85 at 58psi 90%DC Supercharged 1012.15
WHP on E85 at 58psi 90%DC Turbo 927.81
WHP on Gas at 43psi 90%DC NA 1253.14
WHP on Gas at 43psi 90%DC Supercharged 1139.22
WHP on Gas at 43psi 90%DC Turbo 1044.29
WHP on Gas at 58psi 90%DC NA 1447.38
WHP on Gas at 58psi 90%DC Supercharged 1315.80
WHP on Gas at 58psi 90%DC Turbo 1206.15