FIC 2150cc High Z Flow Matched Fuel Injectors for Ford Raptor 2017-2019 - Set of 6
Typical flow rates of 2150cc/min (200lbs/hr) at 3 bar (43.5psi) fuel pressure. Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play Ford ECU Data available.
This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.
Note: These injectors come with Denso pigtails to convert your system to work with Denso style injector plugs. Don't want to solder in pigtails? we've got you covered with Denso to EV6 plug adapters to use with your OEM harness wires! see the blue "choose product options" button for your choice of pigtails or Denso to EV6 Adapters!
*Notice, these 2150cc injectors are NOT compatible with oxygenated fuels like Q16 or VP Import or any other MTBE fuels, as the injectors seal will swell when in contact with MTBE which will cause injector failure.
Description
Included:
8 - FIC 2150cc Denso High Impedance Fuel Injectors (PN: IS409-2150H)
8 - Denso Pigtails, Denso to EV6 Adapters Available
Specifications:
Bottom O-ring Outer Diameter 14mm
Cylinder Quantity 8
Height 36mm
Impedance High-Z
Top O-ring 14mm
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.
CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)
Horsepower supported:
WHP on E85 at 43psi 90%DC NA 1445.93
WHP on E85 at 43psi 90%DC Supercharged 1314.49
WHP on E85 at 43psi 90%DC Turbo 1204.95
WHP on E85 at 58psi 90%DC NA 1670.05
WHP on E85 at 58psi 90%DC Supercharged 1518.23
WHP on E85 at 58psi 90%DC Turbo 1391.71
WHP on Gas at 43psi 90%DC NA 1879.71
WHP on Gas at 43psi 90%DC Supercharged 1708.83
WHP on Gas at 43psi 90%DC Turbo 1566.43
WHP on Gas at 58psi 90%DC NA 2171.07
WHP on Gas at 58psi 90%DC Supercharged 1973.70
WHP on Gas at 58psi 90%DC Turbo 1809.23
Details
- FIC-IS409-2150H
- FIC-IS409-2150H
- ASNU Fuel Injectors
- New
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W5.0000” x H5.0000” x L5.0000”
- Free Basic Shipping
- FREE Fast Priority Mail shipping to the USA and it's territories on ALL Fuel Injectors.
May We Suggest
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
