FIC 2150cc High Z Flow Matched Fuel Injectors for LS Truck/SUV (4.8L,5.3L,6.0L) 1999-2006 - Set of 8

Included:
8 - FIC 2150cc Denso High Impedance Fuel Injectors (PN: IS304-2150H)
8 - Denso Pigtails. Optional Denso to Delphi Multec 2 adapters for OEM harness available, See the product options.

Specifications:
Bottom O-ring Outer Diameter 14mm
Cylinder Quantity 8
Height 48mm
Impedance High-Z
Top O-ring 14mm

Engine Fitment:
4.8L - LR4
5.3L - LM7, LM4, L33
6.0L - LQ4, LQ9 

Fuel Injector Clinic's 2150cc/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. The 2150cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16 or VP Import or any other MTBE oxygenated fuels. Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.

CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)

Horsepower supported:
WHP on E85 at 43psi 90%DC NA 1927.91
WHP on E85 at 43psi 90%DC Supercharged 1752.65
WHP on E85 at 43psi 90%DC Turbo 1606.59
WHP on E85 at 58psi 90%DC NA 2226.74
WHP on E85 at 58psi 90%DC Supercharged 2024.31
WHP on E85 at 58psi 90%DC Turbo 1855.62
WHP on Gas at 43psi 90%DC NA 2506.29
WHP on Gas at 43psi 90%DC Supercharged 2278.44
WHP on Gas at 43psi 90%DC Turbo 2088.57
WHP on Gas at 58psi 90%DC NA 2894.76
WHP on Gas at 58psi 90%DC Supercharged 2631.60
WHP on Gas at 58psi 90%DC Turbo 2412.30