Click on image to zoom

FIC 2150cc High Z Flow Matched Fuel Injectors for Can Am Maverick X3 Turbo R / Turbo RR 2017-2021 - Set of 3

FIC-IS613-2150H
This is a set of 2 FIC 2150cc Fuel Injector Clinic injectors for any Can Am Maverick X3 Turbo R 2017-2021. This injectors are all flow matched together in a set and will include details flow numbers and tuning data.

Typical flow rates of 2150cc/min (205lbs/hr) at 3 bar (43.5psi) fuel pressure. Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play Can-AM ECU Data available.

This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.

Note: These injectors does not include Denso pigtails to ensure reliability we recommend to update your system see the product options.

*Notice, these 2150cc injectors are NOT compatible with oxygenated fuels like Q16 or VP Import or any other MTBE fuels, as the injectors seal will swell when in contact with MTBE which will cause injector failure.
Shipping: FREE Fast Priority Mail shipping to the USA and it's territories on ALL Fuel Injectors.
Was: $788.00
Sale: $688.00
Save: 13%
Save: $100.00

Customize Your Item

- Add Pigtails -
Qty:
Free Basic Shipping

Description

Included:
3 - FIC 2150cc Denso High Impedance Fuel Injectors (PN: IS613-2150H)
* Denso Pigtails Available

Specifications:
Bottom O-ring Outer Diameter 14mm
Cylinder Quantity 3
Height 38mm
Impedance High-Z
Top O-ring 14mm

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)

Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.

Horsepower supported:
WHP on E85 at 43psi 90%DC NA 722.97
WHP on E85 at 43psi 90%DC Supercharged 657.24
WHP on E85 at 43psi 90%DC Turbo 602.47
WHP on E85 at 58psi 90%DC NA 835.03
WHP on E85 at 58psi 90%DC Supercharged 759.12
WHP on E85 at 58psi 90%DC Turbo 695.86
WHP on Gas at 43psi 90%DC NA 939.86
WHP on Gas at 43psi 90%DC Supercharged 854.42
WHP on Gas at 43psi 90%DC Turbo 783.21
WHP on Gas at 58psi 90%DC NA 1085.54
WHP on Gas at 58psi 90%DC Supercharged 986.85
WHP on Gas at 58psi 90%DC Turbo 904.61

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping
  • FREE Fast Priority Mail shipping to the USA and it's territories on ALL Fuel Injectors.
  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST