FIC 2150cc High Z Flow Matched Fuel Injectors for BMW E46 M3 2000-2006 - Set of 6

Included:
6 - FIC 2150cc Denso-Style Plug High Impedance Fuel Injectors (PN: IS801-2150H)
6 - Denso-Style Pigtails. Optional Denso to EV1 adapters for OEM harness available, See the product options.

Specifications:
Bottom O-ring Outer Diameter 14mm
Cylinder Quantity 6
Height 53mm
Impedance High-Z
Top O-ring 14mm

Fuel Injector Clinic's 2150cc/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. The 2150cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.

This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.

CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty. (Warranty Voided if race gas is used only compatible with E85 fuels)

Horsepower supported:
WHP on E85 at 43psi 90%DC NA 1445.93
WHP on E85 at 43psi 90%DC Supercharged 1314.49
WHP on E85 at 43psi 90%DC Turbo 1204.95
WHP on E85 at 58psi 90%DC NA 1670.05
WHP on E85 at 58psi 90%DC Supercharged 1518.23
WHP on E85 at 58psi 90%DC Turbo 1391.71
WHP on Gas at 43psi 90%DC NA 1879.71
WHP on Gas at 43psi 90%DC Supercharged 1708.83
WHP on Gas at 43psi 90%DC Turbo 1566.43
WHP on Gas at 58psi 90%DC NA 2171.07
WHP on Gas at 58psi 90%DC Supercharged 1973.70
WHP on Gas at 58psi 90%DC Turbo 1809.23