Click on image to zoom

Alky Control Turbo Buick 1986-1987 No MAP Methanol Injection Kit

ALKBKTNOMAP
This is a Turbo Buick MAP trigger kit specifically made for the Turbo Buick application. This system uses an aftermarket methanol tank and triggers based on readings from the MAP sensor. Then increases the drive to the pump as the frequency increases. This version does not includes a 3 bar map sensor. The vehicle must have a 3 bar or 3.5 bar map to signal the controller. The original MAP sensor is a 2 bar, will only read to 14.7 psi. This is why the 3 bar map is needed.

Consult your tuner for his preference on trigger MAF vs MAP.

Was: $810.00
Sale: $610.00
Save: 25%
Save: $200.00

Customize Your Item

- Select Nozzle -
Qty:
Free Basic Shipping

Description

This kit is typically bought with the M15 nozzle option and to be used with 100% methanol. Stock turbo or limited performance select the M10 nozzle option. Wishing to use 50/50 select the M10 nozzle option and let the tuner/chip maker your intention of running mix. Performance wise a single nozzle kit on Pump Gas 93, will support mid 10’s in the 1/4 on iron heads or upper 9’s on aluminum heads. Past this level, go to the twin nozzle option. Hot air option.. for the 84/85 and includes a solenoid, solenoid driver module, 2 fittings, and extra hose

Each kit is vehicle specific and will not fit any other application without major modifications. Instructions, tip sheets, and tech support are included.

Features
Progressive controller
90 micron in line filter
Teflon lined stainless AN lines- no plastic pushlock lines in these kits!
Modified pump rated for 100% Methanol- Running 100% Methanol adds high Octane fuel as well as cooling the intake charge tremendously. Water / Methanol only cools. It does not add the necessary Octane for maximum power output.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 20.0 lbs.
  • W20.0000” x H20.0000” x L10.0000”
  • Free Basic Shipping
  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST