Alky Control Turbo Buick 1986-1987 MAP Methanol Injection Kit
Consult your tuner for his preference on trigger MAF vs MAP.
*Notice: If you are using 100% meth the pump should be rebuilt every 2 years, contact us for info.
Description
This kit is typically bought with the M15 nozzle option and to be used with 100% methanol. Stock turbo or limited performance select the M10 nozzle option. Wishing to use 50/50 select the M10 nozzle option and let the tuner/chip maker your intention of running mix. Performance wise a single nozzle kit on Pump Gas 93, will support mid 10’s in the 1/4 on iron heads or upper 9’s on aluminum heads. Past this level, go to the twin nozzle option. Hot air option.. for the 84/85 and includes a solenoid, solenoid driver module, 2 fittings, and extra hose
Each kit is vehicle specific and will not fit any other application without major modifications. Instructions, tip sheets, and tech support are included.
Features
Progressive controller
3 bar map sensor and TPS harness
90 micron in line filter
Teflon lined stainless AN lines- no plastic pushlock lines in these kits!
Modified pump rated for 100% Methanol- Running 100% Methanol adds high Octane fuel as well as cooling the intake charge tremendously. Water / Methanol only cools. It does not add the necessary Octane for maximum power output.
Details
- ALKBKTMAP
- ALKBKTMAP
- Alkycontrol
- New
Shipping Information
- Item Requires Shipping
- 20.0 lbs.
- W20.0000” x H20.0000” x L10.0000”
- Free Basic Shipping
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
