Click on image to zoom

Alky Control GM Truck 1999-2007 MAP Methanol Injection Kit

ALKGMTK99-07MAP
This is a GM Truck 1999-2007 Kit for the 1999-2007 GM truck using the washer tank. Includes new GM washer bottle with kit already modified. 2 bar trigger for small turbocharger or centrifugal blower. There is a 2.5 bar map option for applications going over 15 psi boost. Adding methanol to your fuel can be a great way to get more power and performance out of your vehicle. By injecting methanol into the inlet of a supercharged car, intake air temperatures can be reduced by more than 80%, Methanol burns at the equivalent of 110 octane fuel.

Note: On the 1999-2002 trucks GM used a different float type switch. The tank we supply supersedes the original ones on those trucks and you will need to get a new float switch for tank. On the 2002 and up, simply re-utilize your float switch. We sell the float switch separately in another listing. Also, if the truck is a base model Silverado, it may not have come from factory with a float switch/level indicator. You will need to purchase the float switch separately. Not sure, look on side of tank for a plug with wiring. there is an option for a vertical panel in the event truck is a 2WD and the cubby slot is open on the dash between the gauge cluster and drivers side AC vent. 4WD trucks will typically have controls in this slot of the dash, choose the Horizontal version.

Consult your tuner for his preference on trigger MAF vs MAP.
Was: $879.00
Sale: $679.00
Save: 23%
Save: $200.00

Customize Your Item

- Select Nozzle -
Qty:
Free Basic Shipping

Description

650 RWHP on a single. Twin nozzle upgrades available to increase delivery and support more power. Over 1000 RWHP has been seen on 93 Octane pump gas and this kit running straight methanol on LS  and LT based motors. Kit made specifically for 1999-2007 GM Truck when using a centrifugal supercharger. Example A&A, ECS, Procharger. Triggers using MAP to regulate based on boost not airflow.

Each kit is vehicle specific and will not fit any other application without major modifications. Instructions, tip sheets, and tech support are included.

Features
Progressive controller
90 micron in line filter
Teflon lined stainless AN lines- no plastic pushlock lines in these kits!
Modified pump rated for 100% Methanol- Running 100% Methanol adds high Octane fuel as well as cooling the intake charge tremendously. Water / Methanol only cools. It does not add the necessary Octane for maximum power output.

Details

  • ALKGMTK99-07MAP
  • ALKGMTK99-07MAP
  • Alkycontrol
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 20.0 lbs.
  • W20.0000” x H20.0000” x L10.0000”
  • Free Basic Shipping

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST