Additional Images

Ford 5.0L & 5.8L Vortech V-30 102A Mounting Bracket & Cog Drive Kit

4FP218-030
This Vortech mounting bracket & cog drive kit with a V-30 102A head unit setup for the Small Block Ford Engine 5.0L & 5.8L, which will get you serious power in this bolt-on kit! This is the tuner kit that will require a custom tune done locally after you install the kit, and does not include a programmer, fuel injectors, or high-performance fuel pump.

Vortech Superchargers has now made it easy for Small Block Ford owners to make serious power with a bolt-on kit using the potent V-30 Series Supercharger with new Mounting Brackets and Cog Drive components. The V-30 Centrifugal Supercharger combines advanced technology and race-proven performance and is specifically designed for modified engines with extreme boost demands. Available for Ford 5.0L & 5.8L engines, the Vortech Superchargers V-30 102A kit will transform your SB Ford into an animal at the drag strip! If you would like the kit without the head unit, the Mounting Bracket and Cog Drive assembly also available for purchase separately.
Shipping: FREE continental USA ground shipping on ALL Vortech Supercharger Systems!
Was: $9,229.99
Sale: $8,829.99
Save: 4%
Save: $400.00

Qty:
Free Basic Shipping

Description

There are many options available for Vortech supercharger kits. If you have any questions please email sales@TREperformance.com or call 760-586-5617.

These supercharger kits are the most complete available, including everything needed for installation. This includes all mounting brackets for the blower, pullies, belts, and even oil for the self contained lubricating system. You do not need to make any major modifications or purchase special tools or other parts. Many customers install in their garage or driveway over a weekend.

System Components and Features
Driver side mount
Dual ½” Billet plate mount configuration
Includes plate/idler spacers and all necessary hardware
Flanged 3.6” idler for use with up to 50mm wide belts
Belt length will vary depending on engine deck height and pulley ratio

Vortech Superior Technology
The V-30 102A Supercharger is a new compressor, replacing the existing V-24 Xi-B, and features a plethora of cutting-edge technology, including its technologically advanced, high-efficiency, 5-Axis machined billet impeller and high-diffusion housing developed in our SAE-J1723-compliant supercharger test cell.

Built to address the needs of the over 1,000HP racer, the V-30 is a clean sheet design that incorporates many years of racing compressor knowledge. The patented design employs a unique impeller shaft support system that is robust enough to endure the speeds and accelerations associated with high horsepower drag racing and the durability to perform well in the offshore boat-racing world. The modular design allows fitment of a wide range of compressor stages. Another revolutionary feature of the V-30 series is the new Nano-Tolerance Technology (NTT) that allows Vortech to minimize clearances inside the supercharger, without raising the chances of internal component compromise. This further raises the efficiency of what were already the most efficient superchargers available to new, unprecedented levels. What this means to you is less heat, lower IATs, and even more power at the same boost level.

The V-30 Superchargers also benefit from the Diverging Diffusion Technology (DDT) impeller/volute performance system with engine specific tunability. All V-30 series superchargers share a 4.21:1 internal step-up ratio and are engine oil lubricated or an auxiliary system can be fabricated. Like the V-1 family, the V-30 can have different compressor stages.

The V-30 Enhanced Air Inlet System is designed to work directly in conjunction with gear-drives and other front-facing mounting configurations to allow the V-30 Superchargers increased air induction capacity for each compressor.

Performance Specs:
Internal Step-Up Ratio: 4.21:1
Max Speed: 65,000 RPM
Max Boost: 32 PSI
Max Flow: 2,750 CFM
Max Power: 1,600+ HP
Peak Efficiency: 79%+
Discharge OD: 3.5"
Inlet OD: 5.0"
Discharge ID: 3.06"
Inducer Diameter: 4.02"

Vortech Dealer information
Not any shop can become an Authorized Vortech Installing Dealer; you need to be knowledgable in both naturally aspirated and boosted high performance vehicles, and have the staff to support customers with both in store and phone support. Vortech is very strict about who they allow as dealers. Most online only or mail order companies are unable to qualify as dealers, but you are welcome to stop by our shop to talk about your application or view our supercharger kits. TREperformance has been building high performance vehicles for over 15 years, everything from simple engine upgrades to 1,000 horsepower drag cars. We have been selling superchargers and building blown motors for over a decade, so you know the dealer you are buying from has the knowledge to get you the right kit for your application.

TREperformance is an Authorized Priority Dealer of Vortech/Paxton superchargers.
Custom made and shipped direct from Vortech in 3-5 business days!

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 65.0 lbs.
  • W18.0000” x H18.0000” x L48.0000”
  • Free Basic Shipping
  • This item ships in its own box.
  • FREE continental USA ground shipping on ALL Vortech Supercharger Systems!

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST