Additional Images

AFR Chevy 195cc Enforcer As-Cast SBC Cylinder Head, 64cc Chambers, Angle Plug, DIY No Parts

AFR 1007
AFR is proud to announce the release of its NEW Enforcer series of As-Cast cylinder heads. Comprised of four new budget-friendly cylinder heads, these price conscience offerings do not come fully assembled. The picture listed is what the head would look like fully assembled, but this DIY package contains no intake/exhaust valves, springs, retainers, rocker studs, and guide plates. You can contact us for specific parts from AFR to complete your cylinder head.

For the pre-assembled/complete 195cc SBC Enforcer Head, check out the part number: AFR 1006.

Sold as a single piece, 2 pieces required per engine. Steam holes pre-drilled on these heads. Will work on any SBC block including 350 and 400.
Shipping: FREE continental USA ground shipping on ALL AFR Cylinder Heads
Was: $685.59
Sale: $385.59
Save: 44%
Save: $300.00

Qty:
Free Basic Shipping

Description

AFR's 195cc SBC Enforcer Cylinder head features their Permanent Mold “As-Cast” Technology surfaces on the intake runners, exhaust runners and combustion chambers that allow for extremely accurate and repeatable port location/performance. This budget-friendly head is perfect for your 350 to 400 Cubic Inch operating below 6000 RPM. Sold as a single head, you will need to purchase two to complete a set.

195cc As Cast Flow Chart
  .200 .300 .400 .500 .550 .600
Int 133 188 226 250 251 251
Exh 104 138 158 186 191 197

Test conducted at 28" of water (pressure) on Superflow 600
Bore Size: 4.060", 3/4" radius plate exhaust, 1 3/4" curved pipe

Basic Package Components Part #
As-Cast Combustion Chambers
As-Cast Exhaust Ports
As-Cast Ported Intake Ports
3-angle Valve Job		  

Specifications, Features, and Optional Supporting Components
Head Material

A356 Aluminum
Intake Port Volume 195cc
Intake Port Dimension

2.080" H x 1.270" x 5/16 Radius
Intake Port Location

Stock
Exhaust Port Volume 76cc
Exhaust Port Dimension

1.380" H x 1.420" W
Exhaust Port Location

Stock
Combustion Chamber Size

64cc
Valve Cover Bolt Pattern
 Perimeter Bolt
Valve Angle

23°
Valve Spring Pocket Diameter

1.580" O.D
Max Valve Spring Pocket Machining

1.600" O.D
Warning: Do not machine spring pad any deeper.

 
Deck Thickness
 .450"
Spark Plug Dimensions

14mm x .750" w/Gasket Seat
Head Bolt Diameter
 1/2"
Intake Port Gasket

AFR #6900
Exhaust Port Gasket

AFR #6905
Head Gasket, 350cid Fel-Pro #1003

AFR #6800
Head Gasket, 400cid Fel-Pro #1014

AFR #6802
SB Chevy Head Bolt Kit, ARP #134-3701

AFR #6310
SB Chevy Head Stud Kit, 12 Point Nuts, ARP #234-4301

AFR #6305
Head Bolt Washers, Manley

AFR #6320
Suggested Manifold

AFR #4810
Suggested Manifold

AFR #4812
Suggested Manifold
 RPM Performer or Vic Jr.
Flat Mill

.006" per cc 56cc Maximum
Spark Plug Starting Range

Autolite 3924

Important: Do not port match you intake manifold to any Fel-Pro gasket as it does not precisely match an AFR head.
Note: Milling head deck will affect flow numbers.
These heads are perimeter bolt only, no option for center bolt. The heads have the 86' and older bolt pattern and the Vortec bolt pattern, but only the 86' and older intakes will work due to the port dimensions. The Vortec is a taller port and won't match.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 65.0 lbs.
  • W12.0000” x H12.0000” x L24.0000”
  • Free Basic Shipping
  • This item ships in its own box.
  • FREE continental USA ground shipping on ALL AFR Cylinder Heads
  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST