Whipple Ford Mustang GT 5.0L 2015-2017 Gen 6 3.0L Supercharger Intercooled Complete Stage 2 Kit

WK-2620-STG2-30
This is a Whipple Intercooled Supercharger System with a Gen 6 3.0L blower setup for the 2015-2017 Ford Mustang GT 5.0L which can get you up to 825 (+390hp) engine horsepower and 640 (+240ft/lb) foot pound of torque on 93 octane fuel with only 10-11 psi of boost! (Automatic transmission slightly less power.) This Stage 2 version includes an upgraded billet Roval 132mm electronic elliptical throttle body, high flow 72lb fuel injectors, new high flow intercooler pump and Whipple tuning.

This system is 100% complete, including Tomahawk Flash Tool and tuning for stock vehicles or those with a catback only, just bolt on and drive! Red/orange powdercoated or polished upgrade option is pictured for reference only, the standard kit is black powdercoated.. If you have other modifications such as headers, midpipe, camshafts, etc. then look at the "TUNER" kits on our website.

The all-new Gen 6 blower! This updated blower features a revamped rotor package and port design, specifically engineered to lower temperatures and enhance airflow across the entire RPM curve. With these improvements, you can expect an increase of 25-40HP+ compared to the Gen 5 Blower, while maintaining identical boost levels on 91 Octane!

This kit is 50 State Legal, CARB EO: D-231-55
Limited Supply: only 1 remaining
Shipping: FREE continental USA ground shipping on ALL Whipple Supercharger Systems!
Pricing: $9,599.99

Customize Your Item

- Drive System Options -
- Heat Exchanger Options -
- Supercharger Finish Options -
- Tuning Options -
Qty:
Free Basic Shipping

Description

There are many options available for Whipple Supercharger kits. If you have any questions please email [email protected] or call 760-586-5617.

DETAILS:
Horsepower gain: 390+
Gen 6 3.0L supercharger head unit, 10-11 psi, black powdercoated
Highly effective air-to-water intercooler
Fuel Pump Supplied: No, Booster pump available if needed
Fuel Injectors Supplied: Bosch Mid-Length high flow 72lb/hr
Computer/Ignition Mods.: Tomahawk Flash Tool Supplied
The most power per pound of boost on the market!
Easy and quick installation
System is 100% complete with OEM quality and appearance
Inverted front entry W185RF (3.0 liters) Whipple twin-screw supercharger that significantly outperforms competitions 1.9L and 2.3L roots-type systems (front entry design can be up to 8% more efficient then a side/rear entry)
Complete With All Necessary Parts & Hardware For Installation
No Internal Modifications Required
50 State Legal CARB EO: D231-55

TREperformance is an Authorized Installing Dealer of Whipple Superchargers.
Custom made and shipped direct from Whipple in 5-10 business days!

Each Whipple kit comes with unique software and a OBDII flash tool giving the customer the ability to flash/update whenever needed. Each customer also gets the new Flight Control Software, ability to adjust wheel/axle size, octane adjustment, crank/cam relearn and many other unique features. The Whipple Tomahawk flash tool that allows easy uploading and downloading of the custom files. The Tomahawk also features read and erase trouble codes, live data and data logging capacity.

Nobody puts more time and resources into development then Whipple. The proof is in the product, more power per pound of boost than any other system. The key to making such incredible reliable power is in the Whipple unique twin screw supercharger, massive air-to-water intercooler, oversized front feed Crusher air system and innovative PCM programming that keeps the power-train safe and secure. Whether you’re looking for a daily driver that needs a little more punch or you’re craving a tire-frying, rubber shredding street machine, the Whipple Supercharger systems deliver like no other SC system today. Power from tip in to redline, the new Whipple SC system makes incredible power across the entire rpm range while maintaining industry leading drive-ability.

With years of OEM and racing experience, Whipple engineers have developed a unique PCM calibration that reconfigures all the necessary engine functions including fuel, spark, knock detection, torque management, transmission control and electronic throttle control. The vehicles PCM constantly monitors the engines torque output while monitoring many different parameters to keep the engine in it’s ideal parameters. If a parameter falls below specification, the PCM will lower torque output until the problem can be cured. No other supercharger system has such technology, giving the Whipple SC system unheralded performance and reliability.

The Whipple Advantage
The Whipple Advantage is designed into every Whipple SC system. This advantage is broken down into 5 categories during the design and testing phases which truly sets Whipple apart from others:
1. Best power for money.
2. Most complete package.
3. Maximum power.
4. Maximum power expandability.
5. Aesthetic appeal.

What does this mean? You get it all, in one package. Massive power gains with the biggest superchargers, biggest intercoolers, biggest intercooler systems, biggest air-inlet systems while providing robust belt systems and heavy-duty spring tensioners. The intake manifold is designed with high velocity in mind, while increasing plenum volume to lower pressure loss at high power applications. You then get OEM style fuel and vacuum hoses with nylon sheaving for added protection and appeal, OEM style quick connects with billet aluminum fittings. No ugly brass fittings hanging off the inlet like some others. Wire extensions are injection molded to allow simple plug-and-play installations. Each system also has multiple options for increased performance such as oversized heat-exchangers with dual fans, billet high flow throttle bodies, and oversized cold air intake systems just to name a few. Each kit comes with step-by-step instruction manuals printed in color to help all installers, including the do-it-yourselfer. Kits come with all the fasteners, all color matched for proper aesthetic appeal.

Whipple's Superior Engineering
Leaving no stone unturned, Whipple's revolutionary system for the Ford 5.0L Coyote engines is truly resetting the standards of supercharging. With its massive front feed inlet, typical inlet inefficiencies are a thing of the past. With the lightweight, stainless steel tapered jack-shaft, the supercharger pulley height is offset .75" below the supercharger centerline. Why? Whipple engineers were able to add .50" thicker intercooler core and .25" more plenum volume below the core to decrease temps and pumping losses.

Other positive displacement superchargers sacrificed plenum volume and runner size while Whipple engineer's used every square inch available to open the volume of the manifold, allowing for future expansion of power levels. Small runner and small volume manifolds cause excess boost "build-up" giving you manifold pressure, not proper cylinder pressure. This results in high boost, low power scenario's with excess heat from the lack of proper flowing air volume.

Whipple didn't just stop there, knowing that the Coyote motors love boost, Whipple’s team squeezed an epically large oversized aluminum bar and plate intercooler core into its large intake manifold, nearly 30% larger than the competition! With more open surface area, both on top of the core and the core itself, Whipple's post intercooler air temps are second to none. Cooler air equals denser air which equals more power at each boost level while being safer on engine components.

The bigger intercooler alone wasn’t enough, in previous generations, the supercharger discharge was typically too far forward from the intercooler core, and sandwiched so close to the core on top that the core’s surface area was not properly utilized. With the front feed 2.9L compressor, Whipple was able to increase the volume and distance above the intercooler core, as well as doing the same below. This issue, like some of our competition, increases the "boost" in the manifold, but not at the valves and combustion chamber. This means high boost, low power and high discharge temps. Whipple’s front feed system has a rear discharge port at nearly the center of the IC core. Through countless CFD analysis, Whipple’s design utilizes nearly the entire intercooler core, resulting in less pressure drop and cooler temps for increased power levels.

Another great feature to the Whipple Coyote kits is the oversized heat exchanger, oversized aluminum intercooler reservoir and optional dual fan kit. The oversized heat exchanger is nearly the size of the engine radiator, giving incredible cooling capacity for daily driving, drag racing or road racing. Get the dual Spal fan kit option and increase the airflow over the heat exchanger. The Whipple oversized aluminum reservoir is again a unique feature included with every kit. The aluminum reservoir is remote mounted in the driver side inner fender, keeping it in the cool area away from engine heat, along with having over 1.2 gallons of capacity in the reservoir alone! Giving the intercooler system well over 2 gallons of capacity. This means cooler air temps, less heat soak and more power!

Front Inlet vs. Rear Inlet
When it comes to airflow, shorter paths with less restrictions will always flow greater than long tracts with multiple bends. The Whipple front feed system is far superior to rear inlet based SC systems for a very simple reason, less inlet restrictions. The fact is simple, the front entry systems do not require multiple 90deg bends or one sweeping 180deg bend before the SC inlet, which causes unequal rotor filling and lower volumetric efficiency. The Whipple front entry system requires a minimum of 1 less bend then any rear entry supercharger systems while in most cases, 2 less bends. What does less bends mean? Less turbulence, less inlet losses which allows the supercharger to operate at its peak efficiency. By operating at its peak efficiency, power gains are increased at the same or less boost pressure, making it safer and more effective to meet or exceed the same levels.

Whipple Fuel System
The Whipple front feed system uses Bosch mid-length high flow 72lb/hr fuel injectors and billet high flow fuel rails to supply plenty of fuel for all the power desired. Each Whipple system comes with proper emissions compatible fuel line with OEM quick connect fittings for simple installation.

Full System Specifications:
Most powerful 50-state legal system available (825 engine HP on 93 octane)
No other upgrades required, just massive power right out of the box (nearly double the stock horsepower)
Inverted front entry W185RF (3.0 liters) Whipple twin-screw supercharger that significantly outperforms competitions 1.9L and 2.3L roots-type systems (front entry design can be up to 8% more efficient then a side/rear entry)
Front feed supercharger utilizes precision ground helical cut gears vs a problematic belt or shaft through the inlet that causes massive VE loss
3.0L is 30% larger than 2.3L roots-type allowing lower power consumtpion and lower discharge temps to flow the same amount of air (more power to the rear wheels)
Oversized Crusher inlet for maximum airflow capacity and minimal rotor cavitation
Front feed allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas
Massive air-to-water aluminum bar-plate intercooler offers more cooling than any other positive displacement system available, nothing comes close
Massive intercooler heat exchanger, nearly 150% more volume then some competitors IC water system allowing longer more consistent power levels vs. competition
Optional dual 11" Spal electric fans
Massive oversized aluminum intercooler reservoir (over 2 gallons) holds more than double any competitors IC water system allowing longer more consistent power
Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy
Billet fuel rails, hard coat anodized and laser engraved
Included OBDII flash tool, new Tomahawk flash tool with the new Flight Control technology
Tomahawk allows wheel/tire axle changes (a Whipple exclusive)
72lb/hr dual pattern fuel injectors vs smaller 52lb/hr injectors for more power
Self-contained oversized oil system for dramatically reduced oil temps in even the most demanding conditions
Exclusive 3x5 rotor combo for significant increase in airflow under the curve than less efficient 4x6 rotor combo or 4x4 roots
Center discharge port for better cylinder to cylinder distribution then other twin-screws with cobbled together billet adapters and forward facing discharge
Extra plenum volume below intercooler core for far less pressure drop and better use of the increased surface area of the massive intercooler core
Discharge down design allows for less pressure loss which gives more power at lower boost levels
Top mount design allows for cooler operation then upside down SC's that conduct heat from engine and are trapped by runners and covers, causing hotter manifold temps and less power per pound of boost
More boost at the "hit" than any other twin-screw
Flat torque curve for incredible acceleration
Oversized heat exchanger for incredible intercooler water temps, 150% more volume then competition, standard with every kit
Fits under factory hood with no modifications
No cutting or grinding on the engine block (Roush system requires grinding engine block and timing cover)
No cutting or grinding the K-brace (Roush system requires this to be removed or cut beyond function)
No internal modifications required
No grinding of engine block
Completed installation looks factory installed, not some cobbled together kit with multiple billet adapters
Kits come complete with all necessary parts and hardware for installation
Unique oil level sight glass for easy oil level and quality check, no dipstick to bind or misread
Plug and play wiring with male and female connections
Proven 6-rib belt system with heavy duty spring loaded tensioner and adjustable idler system
Optional 10-rib belt system with matching billet pulleys
Stainless steel tapered jack-shaft with unique plastic cover (or optional carbon fiber) for increased safety
OEM quick connect fittings for easy installation, no ugly brass or steel fittings on the SC
Complete kits and Tuner kits available
Available in wrinkle black, polish, Ford textured blue or any custom color
Easily upgradeable with bigger intercooler pumps, dual electric Spal 11" high speed fans, optional supercharger pulleys
Instant boost at the touch of the throttle
3 minute pulley changes
Lightweight pocketed aluminum SC pulley
NGK Iridium spark plugs included

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 85.0 lbs.
  • W18.0000” x H18.0000” x L60.0000”
  • Free Basic Shipping
  • This item ships in its own box.
  • FREE continental USA ground shipping on ALL Whipple Supercharger Systems!


  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST