Click on image to zoom
Kenne Bell 2005-2009 Ford Mustang 4.6L GT Supercharger - Mammoth 2.8H Intercooled Tuner Kit
TS1000-05-MAM2.8
This is a Kenne Bell Air-to-Water Intercooled Supercharger Tuner Kit with a Black Powdercoated Mammoth 2.8H Twin Screw head unit and stock 6 rib pulley setup for the 2005-2009 Ford Mustang GT 4.6L which will add 261+ of rear wheel horsepower on just 10psi of boost using 91 octane gas! This is the tuner kit which will require a custom tune done locally after you install the kit, and does not include a fuel system, programmer, or tuning. Finished kits available Polished or Black Powdercoated with black supercharger and drive unless otherwise mentioned in the details.
Shipping: FREE continental USA ground shipping on ALL Kenne Bell Supercharger Systems!
Was:
$7,299.00
Sale:
$6,899.00
Save:
5%
Save:
$400.00
Description
There are many options available for Kenne Bell Supercharger kits. If you have any questions please email [email protected] or call 760-586-5617.
DETAILS:
Horsepower gain: 261+
Mammoth 2.8H twin screw supercharger head unit, satin finish, 10psi on 91 octane
93mm Real Cool Air Kit. Up to 41° cooler oil temps.
Bigger and more is better. 20% larger Kenne Bell Hi Density Intercooler concept uses 30% more cooling rows and fins for increased cooling efficiency
130mm Filter (under front valance)
130mm MAF Meter
4.5” Ram Tube
Ford GT Inlet Flex Tube
Dual 75mm Throttle Body
MAMMOTH™ Inlet Manifold
Billet Bypass Valve Assembly with Valet Mode
Belt Drive System: Stock 6 rib
Fuel Pump Booster Supplied: NONE Supplied
Fuel Injectors Supplied: NONE Supplied
Computer/Ignition Mods.: NONE Supplied
System is 100% complete with OEM quality and appearance
FEATURED DETAILS:
• Big increase in HP & torque - EVERYWHERE - not just at peak rpm.
• No boost drop off at higher rpm.
• Does not depend on engine rpm to generate more boost.
• Fat flat torque curve.
• Lower gears not necessary.
• Bar and plate intercooler.
• “Two pass” heat exchanger.
• Available intercooled (9-10 psi) or non-intercooled (5 psi).
• Upgradeable from non-intercooled to intercooled.
• Manual or auto trans.
• Cooler air charge temperature.
• 60°-80° cooler air charge temp and requires 10-16 less HP to drive than Roots type*
• Looks factory. Mounts on top of engine.
• Forward facing. Drive and pulleys are in front of engine.
• All necessary hardware included.
• All major components are assembled and tested.
• Available in black/satin or polished.
• Serviceable. Supercharger can be rebuilt in U.S.
• Best step by step instructions in the industry.
TREperformance is an Authorized Installing Dealer of Kenne Bell Superchargers.
12 Month warranty direct from KB
Custom made and shipped direct from KB in 2-4 weeks
Kenne Bell Dealer information
Kenne Bell is very strict about who they allow as dealers. Dealers must have experience with high performance forced induction applications and provide excellent customer service and application advice. Most online only or mail order companies are unable to qualify as dealers, but you are welcome to stop by our shop to talk about your application or view our supercharger kits.
DETAILS:
Horsepower gain: 261+
Mammoth 2.8H twin screw supercharger head unit, satin finish, 10psi on 91 octane
93mm Real Cool Air Kit. Up to 41° cooler oil temps.
Bigger and more is better. 20% larger Kenne Bell Hi Density Intercooler concept uses 30% more cooling rows and fins for increased cooling efficiency
130mm Filter (under front valance)
130mm MAF Meter
4.5” Ram Tube
Ford GT Inlet Flex Tube
Dual 75mm Throttle Body
MAMMOTH™ Inlet Manifold
Billet Bypass Valve Assembly with Valet Mode
Belt Drive System: Stock 6 rib
Fuel Pump Booster Supplied: NONE Supplied
Fuel Injectors Supplied: NONE Supplied
Computer/Ignition Mods.: NONE Supplied
System is 100% complete with OEM quality and appearance
FEATURED DETAILS:
• Big increase in HP & torque - EVERYWHERE - not just at peak rpm.
• No boost drop off at higher rpm.
• Does not depend on engine rpm to generate more boost.
• Fat flat torque curve.
• Lower gears not necessary.
• Bar and plate intercooler.
• “Two pass” heat exchanger.
• Available intercooled (9-10 psi) or non-intercooled (5 psi).
• Upgradeable from non-intercooled to intercooled.
• Manual or auto trans.
• Cooler air charge temperature.
• 60°-80° cooler air charge temp and requires 10-16 less HP to drive than Roots type*
• Looks factory. Mounts on top of engine.
• Forward facing. Drive and pulleys are in front of engine.
• All necessary hardware included.
• All major components are assembled and tested.
• Available in black/satin or polished.
• Serviceable. Supercharger can be rebuilt in U.S.
• Best step by step instructions in the industry.
TREperformance is an Authorized Installing Dealer of Kenne Bell Superchargers.
12 Month warranty direct from KB
Custom made and shipped direct from KB in 2-4 weeks
Kenne Bell Dealer information
Kenne Bell is very strict about who they allow as dealers. Dealers must have experience with high performance forced induction applications and provide excellent customer service and application advice. Most online only or mail order companies are unable to qualify as dealers, but you are welcome to stop by our shop to talk about your application or view our supercharger kits.
Details
- TS1000-05-MAM2.8
- TS1000-05-MAM2.8
- Kenne Bell Superchargers
- New
Shipping Information
- Item Requires Shipping
- 65.0 lbs.
- W18.0000” x H18.0000” x L60.0000”
- Free Basic Shipping
- This item ships in its own box.
- FREE continental USA ground shipping on ALL Kenne Bell Supercharger Systems!
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
