Click on image to zoom

RC 1750cc Fuel Injectors Fit Bosch Deka IV - 6

SB2-1750-6
These RC Engineering 1750cc High Resistance Saturated fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles:

1996-1999 BMW M3 E36
1998-2000 BMW M Coupe / M Roadster
1996-1998 BMW 328i
2011-2017 Buick Turbo Regal
Any Holden Commodore V6
1990-1996 Nissan 300ZX
1989 Pontiac Turbo T/A
1984-1998 Porsche 911
1993-1998 Toyota Supra

Part # SB2-1750

Description

Included: 6 Bosch style injectors, spacers and flow sheets. The photo is an example of a similar set.

Notes:
1) You must have your computer setup for low impedance.
2) REQUIRED OBD1 Bosch EV1 center notch style injector clips - additional $29.95.

Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes

Specifications
Flow Rate in CC per minute: 1960 CC/MIN @ 55 PSI & 1750 CC/MIN @ 43.5 PSI
Flow Rate in LB per hour: 187 LBS/HR @ 55 PSI / 166 LBS/HR @ 43.5 PSI
Length of injector from o-ring to o-ring: 60mm
Diameter of top o-ring / fuel rail bore: 14mm
Diameter or style lower o-ring or cushion: 14mm - late model GM lower o-ring
Resistance: 9 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.5 Amps at 13.5 Volts
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: SB2-1750
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST