RC 2400cc Short Stubby Pico Fuel Injectors Fit Bosch Style - 8

Included: 8 Bosch style injectors, spacers and flow sheets. The photo is an example of a similar set.

Notes:
1) You must have your computer setup for low impedance.
2) REQUIRED Uses a Nippon/Denso style connector, so most applications will require injector plug changes

Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes

Specifications
Flow Rate in CC per minute: 2430CC/MIN @ 55 PSI & 2160CC/MIN @ 43.5 PSI
Flow Rate in LB per hour: 231 LBS/HR @ 55 PSI & 206 LBS/HR @ 43.5 PSI
Length of injector from o-ring to o-ring: 34mm
Diameter of top o-ring / fuel rail bore: 14mm
Diameter or style lower o-ring or cushion: 14mm - late model GM lower o-ring
Electrical Plug Style: Nippon / Denso
Resistance: 9 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.5 Amps at 13.5 Volts
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: SBF-2400
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!

**48mm and 60mm versions available but uses extension pieces