RC 2400cc Fuel Injectors Fit Bosch EVO Acura Neon Honda Nissan - 4

Included: 4 Bosch style injectors, spacers and flow sheets. The photo is an example of a similar set.

Notes:
1) You must have your computer setup for low impedance.
2) REQUIRED Uses a Nippon/Denso style connector, so most applications will require injector plug changes
3) REQUIRED Uses extension pieces to be compatible with 60mm applications

Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes

Specifications
Flow Rate in CC per minute: 2430CC/MIN @ 55 PSI & 2160CC/MIN @ 43.5 PSI
Flow Rate in LB per hour: 231 LBS/HR @ 55 PSI & 206 LBS/HR @ 43.5 PSI
Length of injector from o-ring to o-ring: 34mm
Length of injector with extension from o-ring to o-ring: 48mm
Diameter of top o-ring / fuel rail bore: 14mm
Diameter or style lower o-ring or cushion: 14mm - late model GM lower o-ring
Electrical Plug Style: Nippon / Denso
Resistance: 9 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.5 Amps at 13.5 Volts
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: SBF-2400
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!

**These injectors uses extension pieces on 34mm injectors. Picture is for reference only of 34mm injectors.