Additional Images
Trickflow GenX LS7 Head, 260cc Intake, Chromoly Retainers, Max Lift .625
TFS-32710001-C01
Serious horsepower for your LS7-based engine, heads sold individually.
rick Flow’s GenX 260 square port aluminum cylinder heads for GM LS7 are designed to meet the needs of enthusiasts using any LS-based engine block with a minimum bore diameter of 4.100"". To improve the factory design, Trick Flow added more material to the A356-T61 aluminum castings for increased rigidity and strength. Then Trick Flow improved the valvetrain system by integrating modular one-piece, 2024-T4 billet aluminum rocker arm mounts that are removable for high-end shaft rocker setups. Trick Flow’s high flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband.
Other major improvements include the available 6-bolt per cylinder clamping for GMPP LSX and other aftermarket blocks, clearance for 3/8"" pushrods, through-deck coolant holes to fit all GM LS gasket and block combinations, Trick-Alloy powdered-metal valve guides, solid stem valves, and two Trick Flow by PAC Racing Pacaloy™ valve spring packages.
Trick Flow GenX 260 square port cylinder heads for GM LS7 work with all LS7-style intake manifolds. The heads maintain the factory intake and exhaust port locations, valve angles, and valve locations so they work with existing LS7-based pistons. Fully assembled cylinder heads include valve springs, steel or titanium spring retainers, die forged steel valve locks, and valves. The cylinder heads are available fully assembled or as bare castings.
rick Flow’s GenX 260 square port aluminum cylinder heads for GM LS7 are designed to meet the needs of enthusiasts using any LS-based engine block with a minimum bore diameter of 4.100"". To improve the factory design, Trick Flow added more material to the A356-T61 aluminum castings for increased rigidity and strength. Then Trick Flow improved the valvetrain system by integrating modular one-piece, 2024-T4 billet aluminum rocker arm mounts that are removable for high-end shaft rocker setups. Trick Flow’s high flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband.
Other major improvements include the available 6-bolt per cylinder clamping for GMPP LSX and other aftermarket blocks, clearance for 3/8"" pushrods, through-deck coolant holes to fit all GM LS gasket and block combinations, Trick-Alloy powdered-metal valve guides, solid stem valves, and two Trick Flow by PAC Racing Pacaloy™ valve spring packages.
Trick Flow GenX 260 square port cylinder heads for GM LS7 work with all LS7-style intake manifolds. The heads maintain the factory intake and exhaust port locations, valve angles, and valve locations so they work with existing LS7-based pistons. Fully assembled cylinder heads include valve springs, steel or titanium spring retainers, die forged steel valve locks, and valves. The cylinder heads are available fully assembled or as bare castings.
Limited Supply: only 2 remaining
Was:
$1,584.99
Sale:
$1,384.99
Save:
13%
Save:
$200.00
Description
Manufacturer's Part Number: TFS-32710001-C01
Part Type: Cylinder Heads
Product Line: Trick Flow® GenX® 260 Cylinder Heads for GM LS7
UPC: 842645109126
Cylinder Head Style: Assembled
Cylinder Head Material: Aluminum
Cylinder Head Finish: Natural
Combustion Chamber Volume (cc): 70
CNC-Machined Combustion Chamber: Yes
Intake Runner Volume (cc): 260cc
Exhaust Runner Volume (cc): 87cc
CNC-Machined Intake Runner: Yes
CNC-Machined Exhaust Runner: Yes
Combustion Chamber Style: Heart
Intake Port Shape: Square
Intake Port Location: Standard
Exhaust Port Shape: Oval
Exhaust Port Location: Standard
Spark Plug Style: Angle
Intake Valves Included: Yes
Intake Valve Diameter (in): 2.200 in.
Exhaust Valves Included: Yes
Exhaust Valve Diameter (in): 1.600 in.
Valve Springs Included: Yes
Maximum Valve Lift (in): 0.625 in.
Outside Diameter of Outer Spring (in): 1.300 in.
Damper Spring Included: No
Number of Springs Per Valve: Dual
Retainers Included: Yes
Retainer Material: Chromoly steel
Locks Included: Yes
Lock Style: 7 degree
Valve Stem Seals Included: Yes
Rocker Arm Studs Included: No
Rocker Arms Included: No
Rocker Arm Nuts Included: No
Guideplates Included: No
Valve Cover Mounting Style: Centerbolt
Accessory Bolt Holes Drilled: Yes
Intake Valve Angle: 12
Exhaust Valve Angle: 12
Valve Guides Included: Yes
Valve Guide Material: Powdered metal
Valve Seats Machined: Yes
Valve Seat Machine Style: 3-angle
Valve Seat Material: Ductile iron
Steam Holes Drilled: No
Oiling Style: Through pushrod
Machined for O-Ring: No
Heat Crossover: No
Quantity: Sold individually.
Notes: These cylinder heads are not designed as a stock replacement, they can only be used on engines with a minimum bore diameter of 4.100 in. Includes new rocker arm rail mounts for use with LS7 1.8 ratio rocker arms. OEM rocker arm rail mounts will not work with these heads.
CARB EO Number: D-747 (pdf. To see a list of qualifying vehicles, enter CARB EO Number D-747
Emissions: California EO Approved
Part Type: Cylinder Heads
Product Line: Trick Flow® GenX® 260 Cylinder Heads for GM LS7
UPC: 842645109126
Cylinder Head Style: Assembled
Cylinder Head Material: Aluminum
Cylinder Head Finish: Natural
Combustion Chamber Volume (cc): 70
CNC-Machined Combustion Chamber: Yes
Intake Runner Volume (cc): 260cc
Exhaust Runner Volume (cc): 87cc
CNC-Machined Intake Runner: Yes
CNC-Machined Exhaust Runner: Yes
Combustion Chamber Style: Heart
Intake Port Shape: Square
Intake Port Location: Standard
Exhaust Port Shape: Oval
Exhaust Port Location: Standard
Spark Plug Style: Angle
Intake Valves Included: Yes
Intake Valve Diameter (in): 2.200 in.
Exhaust Valves Included: Yes
Exhaust Valve Diameter (in): 1.600 in.
Valve Springs Included: Yes
Maximum Valve Lift (in): 0.625 in.
Outside Diameter of Outer Spring (in): 1.300 in.
Damper Spring Included: No
Number of Springs Per Valve: Dual
Retainers Included: Yes
Retainer Material: Chromoly steel
Locks Included: Yes
Lock Style: 7 degree
Valve Stem Seals Included: Yes
Rocker Arm Studs Included: No
Rocker Arms Included: No
Rocker Arm Nuts Included: No
Guideplates Included: No
Valve Cover Mounting Style: Centerbolt
Accessory Bolt Holes Drilled: Yes
Intake Valve Angle: 12
Exhaust Valve Angle: 12
Valve Guides Included: Yes
Valve Guide Material: Powdered metal
Valve Seats Machined: Yes
Valve Seat Machine Style: 3-angle
Valve Seat Material: Ductile iron
Steam Holes Drilled: No
Oiling Style: Through pushrod
Machined for O-Ring: No
Heat Crossover: No
Quantity: Sold individually.
Notes: These cylinder heads are not designed as a stock replacement, they can only be used on engines with a minimum bore diameter of 4.100 in. Includes new rocker arm rail mounts for use with LS7 1.8 ratio rocker arms. OEM rocker arm rail mounts will not work with these heads.
CARB EO Number: D-747 (pdf. To see a list of qualifying vehicles, enter CARB EO Number D-747
Emissions: California EO Approved
Details
- TFS-32710001-C01
- TFS-32710001-C01
- Trickflow
- Available
- New
Shipping Information
- Item Requires Shipping
- 35.0 lbs.
- W8.0000” x H8.0000” x L24.0000”
- Free Basic Shipping
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
