Additional Images

AFR 305cc BBC Rectangle Port Cylinder Heads, Partially Ported

AFR 2100
AFR's 305cc rectangle port heads feature partially CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for moderate street, or street/strip builds with displacements up to 509 cubic inches, operating up to 6500 RPM. Also available with 100% CNC chambers for increased air flow (see chart). Component upgrades and machining options are available to customize AFR Heads to your specific build.
Shipping: FREE continental USA ground shipping on ALL AFR Cylinder Heads
Was: $3,709.84
Sale: $3,409.84
Save: 8%
Save: $300.00

Qty:
Free Basic Shipping

Description

The Ultimate Race/Street Weapon!
For the ultimate in "Rectangle Port" performance, available in partial or full CNC ported, AFR 305 has no competition. With flow figures most small to medium sized rectangular port castings would be envious of, these high flowing "Rectangle" produce tremendous airspeed and really pack a punch. AFR has included it's trademark 3/4" deck, reinforced rocker stud bosses, and thick rugged castings, so you can own the strongest and most efficient heads on the market today. Premium hardware all come as standard equipment. Take note the higher flowing exhaust ports are raised .375 over stock location, and therefore these heads might not be a direct bolt-on in every application. These heads have no EGR and are not emissions legal.

Note:
1" longer head bolts needed on four bottom exhaust bolt holes. Angle mills might require a .120" Thick intake gasket.

Basic Package Components Part #
50% CNC Ported Exhaust Ports
20% CNC Ported Intake Ports
30% CNC Ported Combustion Chambers
Competition 5-angle Valve Job

11/32" Intake Valve, 2.250" x 5.500" O.A.L AFR #7620
11/32" Nail Head Exhaust Valve, 1.880" x 5.450" Overall Valve Length AFR #7630
Manley 10° Steel Retainers 1.500" O.D x 1.168" I.D x .844" I.D AFR #8518
PAC Racing Spring #1224 1.625 O.D. Solid Roller, 275lbs on seat, .850 Maximum Lift, Max RPM 7400-7600 AFR #8031
10° 11/32" Valve Locks with lashcap recess AFR #9005
ARP 7/16" Rocker Exhaust Studs AFR #6406
ARP 7/16" Rocker Intake Studs AFR #6407
Adjustable 3/8" Guide Plates AFR #6109
11/32" Viton Valve Seals AFR #6611
Hardened Spring Cup 1.740" O.D / 1.650" I.D AFR #8046
Intake Valve Seats 2.450" O.D x 2.000" I.D x .375" Deep AFR #9062
Exhaust Valve Seats 2.000" O.D x 1.580" I.D x .375" Deep AFR #9064
11/32" Intake Bronze Valve Guides .531" O.D x 2.10" O.A.L AFR #9045
11/32" Exhaust Bronze Valve Guides .531" O.D x 2.25" O.A.L AFR #9046

Specifications, Features, and Optional Supporting Components
Head Torque 75 ft. lbs
Intake Port Gasket AFR #6853 (.120" Thick) or AFR #6855 (.060" Thick)
Exhaust Port Gasket AFR #6858
Head Gasket, Fel-Pro #1047 (Mark V and VI) AFR #6849
Head Gasket, Fel-Pro #1017-1 (Mark IV) AFR #6350
Head Bolts, ARP 135-3703 (Mark IV) AFR #6306
Head Bolts, ARP 135-3707 (Mark V) AFR #6308
Head Studs, ARP 235-4713 AFR #6307
Head Bolt Washers, Manley AFR #6320
Suggested Manifold
Super Victor Victor Jr., 
Spark Plug Starting Range Autolite 3932
Combustion Chambers 121cc w/ CNC Chambers or 117cc w/ As Cast Chambers
Valve Spring Pocket Diameter 1.725 O.D
Intake Port Dimension 2.380"H x 1.680"W x 11/32 Radius
Exhaust Port Dimension 1.720"H x 1.920" W
Valve Angle 24°/4° Intake, 15°/4° Exhaust
Angle Mill
.009" per cc/ Maximum 104cc as cast or CNC Chamber
Flat Mill
.006" per cc/ Maximum 108cc as cast or 114cc CNC Chamber
Stud Girdle, (AFR Specific) AFR #6202
Important: Do not port match you intake manifold to any Fel-Pro gasket as it does not precisely match AFR heads.
Note: Milling head deck will affect flow numbers.
1" longer head bolts needed on four bottom exhaust bolt holes. Angle mills might require a .120 thick intake gasket.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 80.0 lbs.
  • W24.0000” x H12.0000” x L24.0000”
  • Free Basic Shipping
  • This item ships in its own box.
  • FREE continental USA ground shipping on ALL AFR Cylinder Heads

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST