Genuine 60lb Siemens Deka IV EV1 Short Fuel Injectors - 1

Included: 1 Genuine Siemens Deka IV EV1 Short injectors, part number 107962 or FI114962. The photo is an example of a similar set.

These High Resistance(Approx. 12 OHMS) Saturated fuel injectors will fit many applications
Note:
If your vehicle needs OBD1 style injector clips/plugs, please select them from the drop down menu above - additional $9.95.

Specifications
Flow Rate in CC per minute: 630 CC/min @ 43.5 PSI
Flow Rate in LB per hour: 60 LBS/HR @ 43.5 PSI
Resistance: 12 ohms (High Impedance, High Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30 PSIG / Max 100 PSIG
Spacers/O-rings Included: YES, on the injectors
Fuel Delivery: Multi-hole disc
Electrical connector type: EV1 (Minitimer, Jetronic)
Body Design: Compact, composite plastic
Overall Length: 48 mm, 1.9 inches
Diameter: 16 mm, 0.6 inches
Oring to Oring Length: 34 mm, 1.4 inches
Orings: Top and bottom 14.5 mm
Filter basket on top with a 4 hole disc fuel delivery nozzle for superior fuel atomization
Warranty: 1 Year Warranty!

These Siemens Deka IV injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 80 lbs/hr at 80 PSI! Despite the high flow rate these units are high-impedance, plus they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive-ability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.