Click on image to zoom
Honda Accord 4 cylinder 1200cc Fuel Injectors 1996-2001
PL9-1200
These RC Engineering 1200cc Low Resistance Peak and Hold fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles, but you MUST have your computer setup for low impedance:
Honda Accord 4 Cylinder Engines 1996-2001 (REQUIRED Clips)
Part # PL9-1200
Honda Accord 4 Cylinder Engines 1996-2001 (REQUIRED Clips)
Part # PL9-1200
Shipping: Free domestic shipping on all RC fuel injectors.
Was:
$395.00
Sale:
$355.50
Save:
10%
Save:
$39.50
Description
Included: 4 Honda style injectors, spacers/o-rings, and flow sheets. The photo is an example of a similar set.
Notes:
1) You must have your computer setup for low impedance.
2) OBD1 style injector clips are REQUIRED. If you would like new OBD1 style injector clips, they are available - additional $19.95.
3) Standard spacers included are for B-Series/H-Series engines. If you need D-Series spacers, please select them from the drop down menu above.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 1200CC/min @ 55 PSI
Flow Rate in CC per minute: 1090CC/min @ 43.5 PSI
Flow Rate in LB per hour: 114LBS/HR @ 55 PSI
Flow Rate in LB per hour: 104LBS/HR @ 43.5 PSI
Resistance: 2.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 4.0 Amps / Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PL9-1200
Spacers/O-rings Included: YES
Warranty: 1 year warranty!
Notes:
1) You must have your computer setup for low impedance.
2) OBD1 style injector clips are REQUIRED. If you would like new OBD1 style injector clips, they are available - additional $19.95.
3) Standard spacers included are for B-Series/H-Series engines. If you need D-Series spacers, please select them from the drop down menu above.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 1200CC/min @ 55 PSI
Flow Rate in CC per minute: 1090CC/min @ 43.5 PSI
Flow Rate in LB per hour: 114LBS/HR @ 55 PSI
Flow Rate in LB per hour: 104LBS/HR @ 43.5 PSI
Resistance: 2.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 4.0 Amps / Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PL9-1200
Spacers/O-rings Included: YES
Warranty: 1 year warranty!
Details
- PL9-1200
- PL9-1200
- RC Engineering
- New
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W5.0000” x H5.0000” x L5.0000”
- Free Basic Shipping
- Free domestic shipping on all RC fuel injectors.
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
