Honda Accord 660cc Fuel Injectors 1990-1995
PL9-660
Not For Sale
These RC Engineering 660cc Low Resistance, Peak and Hold fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles:
1990-1995 Honda Accord
Part # PL9-660
1990-1995 Honda Accord
Part # PL9-660
Description
Included: 4 Honda style injectors, spacers/o-rings, and flow sheets. The photo is an example of a similar set.
Note:
1) OBD1 style injector clips are REQUIRED. If your vehicle still has the stock injector clips and needs OBD1 style injector clips, please select them from the drop down menu above - additional $19.95.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 660CC/min @ 43.5 PSI
Flow Rate in LB per hour: 62LBS/HR @ 43.5 PSI
Resistance: 2.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 4.0 Amps/ Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PL9-660
Spacers/O-rings Included: YES
Warranty: 1 year warranty!
Note:
1) OBD1 style injector clips are REQUIRED. If your vehicle still has the stock injector clips and needs OBD1 style injector clips, please select them from the drop down menu above - additional $19.95.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 660CC/min @ 43.5 PSI
Flow Rate in LB per hour: 62LBS/HR @ 43.5 PSI
Resistance: 2.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 4.0 Amps/ Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PL9-660
Spacers/O-rings Included: YES
Warranty: 1 year warranty!
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W5.0000” x H5.0000” x L5.0000”
- Free Basic Shipping