Acura Integra 1600cc Fuel Injectors 1992-2001
PB2-1600
Not For Sale
These RC Engineering 1600cc Low Resistance Peak and Hold fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles:
1992-1995 Acura Integra
1996-2001 Acura Integra (OBD1 style injector connecting plugs are REQUIRED)
Part # PB2-1600
1992-1995 Acura Integra
1996-2001 Acura Integra (OBD1 style injector connecting plugs are REQUIRED)
Part # PB2-1600
Description
Included: 4 Honda style injectors, spacers and flow sheets. The photo is an example of a similar set.
Notes:
1) You must have your computer setup for low impedance.
2) If you would like new OBD1 Bosch EV1 center notch style injector clips - additional $19.95.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 1600CC/min @ 43.5 PSI
Flow Rate in LB per hour: 152LBS/HR @ 43.5 PSI
Resistance: 5.0 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 2.5 Amps / Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PB2-1600
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!
Notes:
1) You must have your computer setup for low impedance.
2) If you would like new OBD1 Bosch EV1 center notch style injector clips - additional $19.95.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 1600CC/min @ 43.5 PSI
Flow Rate in LB per hour: 152LBS/HR @ 43.5 PSI
Resistance: 5.0 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 2.5 Amps / Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PB2-1600
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W5.0000” x H5.0000” x L5.0000”
- Free Basic Shipping