TRE 1000cc Wide Bosch Style Fuel Injectors - 8

Included: 8 Wide Body Bosch style injectors. The photo is an example of a similar set.

These Low Resistance(Approx. 2.5 OHMS) Peak and Hold fuel injectors will fit many applications, including, but not limited to:
BMW 5, 6, 7, and 8 Series V8 Models
BMW M5, X5 and Z8 Models
Chevrolet Camaro, Caprice, Corvette and Impala
Ford Mustang GT, lx, Cobra 5.0L and 4.6L
Pontiac Firebird and TransAm

These are Bosch style injectors which work on most top feed Bosch fuel injected vehicles.
Email us if you have questions regarding fitment.

Note:
If your vehicle needs OBD1 style injector clips/plugs, please select them from the drop down menu above - additional $39.95.

Specifications
Condition: 100% BRAND NEW
Typical Flow Rate in CC per minute: 1000 CC/min @ 43.5 PSI (3 BAR)
Typical Flow Rate in LB per hour: 95 LBS/HR @ 43.5 PSI (3 BAR)
Typical Flow Rate in CC per minute: 1050 CC/min @ 50 PSI (3.5 BAR)
Typical Flow Rate in LB per hour: 100 LBS/HR @ 50 PSI (3.5 BAR)
Actual flow rate of your injectors may vary, but will be matched together
Resistance: 3.0 ohms (Low Impedance, Low Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 2.5 Amps/ Hold 1.0 Amps
Pressure: Min 30 PSIG / Max 100 PSIG
Spacers/O-rings Included: YES, on the injectors
Fuel Delivery: Upgraded single fuel delivery nozzle for superior fuel atomization
Spray Pattern: Single Nozzle With Cone Shape Spray Pattern
Electrical connector type: EV1 (Minitimer, Jetronic)
Overall Length: 3 inches, 74 mm
Orings: Top and bottom, 14.5 mm
Warranty: 1 Year Warranty!
TREperformance Fuel Injector Guarantee:

TREperformance Inc. warranties all of our fuel injectors for 1 year from the purchase date. If you have any problems with your injectors we will test them and replace any defective injectors free of charge. Buy with confidence though, in years of selling these injectors we have seen virtually no injectors fail! If you feel any of your injectors may be defective just contact us via email to receive an RMA number and we will reply back with all the return instructions. No returns are accepted without an RMA number. All of our TRE Fuel Injectors are manufactured according to strict guidelines in order to maintain ISO 9002 and ISO/TS 16949 quality system certifications.

TREperformance Inc. manufactures these fuel injectors and has each injector tested before shipment. These brand new, recently developed fuel injectors are always in stock and will often ship the day of payment. Save some money and try our TRE Fuel Injectors. We back them with a 1 year warranty! Thank you for considering TREperformance Fuel Injectors!